What it approves
Fabrication of Mechanical Specialties, Inc. Model 606 cargo hook in accordance with FAA approved Mechanical Specialties Master Drawing List No. 606 MOL, Revision "C," dated August 6, 1998, or later FAA approved revision: and installation of this cargo hook
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Number SR00632SE
This certificate, issued to Mechanical Specialties, LLC 1000 85th Avenue SE Olympia, WA 98501
Part * of the * Regulations.
Original ProductType Certificate Number: *See attached Approved Model List (AML) Make: SR00632SE for list of approved rotorcraft Model: models and applicable airworthiness regulations
Description of the Type Design Change: Fabrication of Mechanical Specialties, LLC Model 606 cargo hook in accordance with Federal Aviation Administration (FAA) approved Mechanical Specialties, LLC Master Drawing List No. 606 MDL, Revision C, dated August 6, 1998, or later FAA-approved revision. Installation of this cargo hook in accordance with Section 4.0 of FAA-approved Mechanical Specialties, LLC Operating and Maintenance Manual No. MSI-MNL003, Revision A, dated July 25, 1997, or later FAA-approved revision. Inspection of this cargo hook in accordance with Section 5 of Mechanical Specialties, LLC Operating and Maintenance Manual No.
MSI-MNL003, Revision A, dated July 25, 1997, or later FAA-approved revision.
Limitations and Conditions: Approval of this change in type design applies to only those Bell model rotorcraft listed on AML SR00632SE, dated April 19, 2012, or later FAA-approved revision, which were previously equipped with an FAA-approved installation of one of the cargo hooks listed in the table presented on the continuation sheet of this supplemental type certificate (STC). This approval should not be extended to rotorcraft of these models on which other previously approved modifications are incorporated unless it is determined by the installer that the relationship between this change and any of those other previously approved modifications, including changes in type design, will introduce no adverse effect upon the airworthiness of that rotorcraft.
Date of application: September 20, 1997 Date reissued: April 19, 2012 Date of issuance: October 13, 1998 Date amended:
(Signature)
Acting Manager, Seattle Aircraft Certification Office (Title)
Number SR00632SE
Mechanical Specialties, LLC Issued: October 13, 1998 Reissued: April 19, 2012 Amended:
Rotorcraft modified in accordance with this STC must be operated in accordance with an FAA-approved copy of the Rotorcraft Flight Manual Supplement (RFMS), Mechanical Specialties, LLC Document No. MSI-FMS-606-01, dated October 13, 1998, or later FAA-approved revision. A copy of this certificate, AML SR00632SE, the FAA-approved RFMS, and the Operating Maintenance Manual must be maintained as part of the permanent records of the modified rotorcraft.
The Mechanical Specialties, LLC Model 606 cargo hook will replace the following existing cargo hook installations:
Breeze Eastern Model Breeze Eastern Part Number Bell Helicopter Part Number Applicable Bell Helicopter A-60LT SP-7109-11 204-072-924-1 204B, 205A, 205A-1, 212, 412, 412EP A-60LT SP-7109-12 204-072-924-3 204B, 205A, 205A-1, 212, 412, 412EP A-60LT SP-7109-62 204-072-924-7 204B, 205A, 205A-1, 212, 412, 412EP
If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of the permission.
- END -
FAA FORM 8110-2-1 (10-69) PAGE 3 OF 3 PAGES
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 6
Every issue · 2
DRS keeps each issue of an STC as its own record, with its own certificate and attachments.
| Date | Status | Files |
|---|---|---|
| April 19, 2012 | Reissued, current | CertificateApproved model list |
| October 13, 1998 | Issued, earlier issue | Certificate |