STC SR00654DE

FAA Form 8110-2 (11/20) SUPERSEDES PREVIOUS EDITION United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number:

Certifies that the change in the type design for the following product with the limitations and conditions of .

Page 1 of 2 therefore as specified hereon meets the airworthiness requirements of * Certification basis is set fourth in Type Certificate Data Sheet H2SW.

SR00654DE

DART AEROSPACE USA, INC 3845 NE 30th Avenue Hillsboro, OR 97124 Part 27* the Federal Aviation Regulations H2SW Bell Helicopter Textron 407; 206A; 206B; 206L (S/N 46601 thru 46617); 206L-1 (S/N 45601 thru 45790 except 45739); 206L-3; 206L-4 Installation of Rotary Latch Seat Belts in accordance with Master Drawing List DL-407SB-100, Revision A, dated November 1, 2007, FAA approved November 20, 2007, or later FAA approved revision.

September 21, 2007 August 22, 2023 November 20, 2007 February 22, 2008 for Manager, West Certification Branch

1. Instructions for Continued Airworthiness Paravion Technology, Inc. Report PR-407SB-120M, Revision 1, dated November 2, 2007, FAA accepted November 20, 2007, or later FAA accepted revision is required for this installation.

2. This approval should not be extended rotorcraft of this model on which other previously approved modifications are incorporated unless it is determined that the interrelationship between this change and any of those other previously approved modifications, including changes in type design, will introduce no adverse effect upon the airworthiness of that rotorcraft.

3. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

FAA Form 8110-2 (11/20) SUPERSEDES PREVIOUS EDITION United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number:

Page 2 of 2 SR00654DE