What it approves
Installation of a SFIM Force Trim System.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Number SR00760NY This certificate issued to
Part 27 of the Federal Aviation Regulations.
Installation of a SFIM Force Trim System in accordance with HAS Master Drawing List Document MDL97-05-01, Rev. G, dated October 12, 2006, or later FAA approved revision.
HAS Corporation Rotorcraft Flight Manual Supplement HAS-FMS-97-05-01, Rev. A, dated July 26, 2007, or later FAA approved revision is required. Instructions for Continued Airworthiness HAS Document MM97-09-02, Rev. A, dated November 20, 2006, or later revision is required.
The installer must determine whether this design change is compatible with previously approved modifications. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.
Bell Helicopter Textron, Inc.
441 Industrial Park Road Piney Flats, TN 37686 H2SW Make : Bell Helicopter Textron Canada Limited Model : 407 Date of application : August 22, 1996
Date of issuance : December 02, 1997
Date reissued : February 10, 2003;
February 16, 2012
Date amended : November 14, 2001;
July 26, 2007
( Signature) Scott A. Horn, Acting Manager, Rotorcraft Certification Office, Southwest Region
(Tl )
FAA Form 8110-2-1(10-69) Page 2 of 2
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| Bell Helicopter Textron Canada Limited | 407 | H2SW |