What it approves
Fabrication of Helipro spar replacement system
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
FAA Form 8110-2 (5/14) Page 1 of 2
Number: SR00767SE
This certificate issued to: Vector Aerospace Helicopter Services, USA 1873 Shell Simmons Drive, Suite 110 Juneau, AK 99801 Part * of the * Regulations.
Original Product – Type Certificate Number: *See attached Approved Model List (AML) Make: No. SR00767SE for a list of approved rotorcraft Model: models and applicable airworthiness regulations Description of Type Design Change:
Fabrication of Helipro spar replacement system in accordance with McClenahan Master Drawing List specified on AML No.
SR00767SE, or later Federal Aviation Administration (FAA) approved revision; and installation of this system in accordance with Helipro Installation Instruction Report specified on AML SR00767SE, or later FAA approved revision. This modification must be maintained in accordance with Helipro Maintenance Manual Supplement Report, or Instructions for Continued Airworthiness Report specified on AML SR00767SE, or later FAA approved revision.
Approval of this change in type design applies to rotorcraft models specified on AML SR00767SE, only, that are equipped with standard tail booms and empennages. This approval should not be extended to other rotorcraft of these models on which other previously approved modifications are incorporated unless it is determined that the relationship between this change and any other previously approved modifications, including changes in type design, will introduce no adverse effect upon the airworthiness of that helicopter.
If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
No Rotorcraft Flight Manual Supplement was deemed necessary for this modification. A copy of this Certificate, AML, SR00767SE, and FAA approved Maintenance Manual Supplement or Instructions for Continued Airworthiness must be maintained as part of the permanent records of the modified helicopter.
Date of Application: August 24, 1999 Date Reissued: September 10, 2005 February 4, 2016 March 7, 2016 Date of Issuance: January 18, 2000 Date Amended: May 1, 2000 By Direction of the Administrator
Signature Title Christina Underwood Manager Atlanta Aircraft Certification Office
United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number: SR00767SE
FAA Form 8110-2 (5/14) Page 2 of 2
To (Name and address of transferee)
From (Name and address of grantor)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 13
| Make | Model | Data sheet |
|---|---|---|
| AST Inc. | UH-1F | H11SW |
| Bell Helicopter Textron Inc. | 204B | H1SW |
| Hagglund Helicopters LLC | UH-1H | H15NM |
| Overseas Aircraft Support Inc | UH-1H | H7SO |
| Richards Heavylift Helo Inc. | UH-1B | H3SO |
| Richards Heavylift Helo Inc. | UH-1H | H3SO |
| Rotorcraft Development Corporation | TH-1F | H12NM |
| Rotorcraft Development Corporation | UH-1B | H13WE |
| Rotorcraft Development Corporation | UH-1F | H12NM |
| Rotorcraft Development Corporation | UH-1H | H13WE |
| Rotorcraft Development Corporation | UH-1P | H12NM |
| San Joaquin Helicopters | UH-1B | H1RM |
| Tamarack Helicopters Inc. | UH-1F | H7NE |
Every issue · 3
DRS keeps each issue of an STC as its own record, with its own certificate and attachments.
| Date | Status | Files |
|---|---|---|
| March 7, 2016 | Reissued, current | CertificateApproved model list |
| February 4, 2016 | Reissued, earlier issue | CertificateApproved model list |
| September 10, 2005 | Reissued, earlier issue | CertificateApproved model list |