STC SR00805NY

Compliance & Airworthiness Division New York ACO Branch U.S. Department 1600 Stewart Avenue of Transportation Suite 410 Federal Aviation Westbury, NY 11590 Administration (516) 228-7300, Fax: (516) 794-5531 FEB 2 1 2018 Ms. Jackey Greig Aircraft Certification Transport Canada 4900 Yonge Street 4th Floor (PAHI) Toronto ON M2N 6A5 Canada Subject: Reissuance of Supplemental Type Certificate (STC) - FAA STC No. SR00805NY Dear Ms. Greig:

Please be advised that after the Issuance of FAA STC SROO805NY, it was discovered to have typographical errors on the Certificate and the AML. The errors have been corrected, and the STC has been reissued, with a reissue date of February 14, 2018. The original NAPA Project was 5010-0-16-0332 for TCCA STC SH97-59, Issue 4 and the corresponding FAA project number was SA08731NY-R.

Please forward the enclosed STC and a copy of "Information Concerning Your Responsibility as a Holder of a Supplemental Type Certificate, Issued to a Canadian Applicant" to Northeast Engineering and Development Ltd. A copy of the STC and required documents should accompany each installation. Also, your attention is directed to the Limitations and Conditions: specified in the STC.

If you have any questions relating to the above information, please contact Ms. Pamela Cartledge at (516) 228-7317.

Sincerely, Sage Dop li FoR Acting Manager, New York ACO Branch Compliance & Airworthiness Division Enclosure cc; Jackey.greig@tc.gc.ca

AVIATION United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate IMPORT Number: SR00805NY Northeast Engineering & Development Ltd This certificate issued to: 26 McEwan Drive, Unit 6 Bolton, Ontario, L7E 1E6 Canada Part 27 of the Federal Aviation Regulations.

Original Product - Type Certificate Number: * See attached FAA Approved Model List (AML) Model: *See attached FAA Approved Model List (AML) Make: *See attached FAA Approved Model List (AML) No. SR00805NY for a list of approved models and applicable airworthiness regulations Description of Type Design Change:

1. Installation of Bear Paws in accordance with Transport Canada Civil Aviation (TCCA) approved Northeast Engineering & Development Ltd. Master Data List 960501, Issue 4, dated July 27, 2015 or later TCCA approved revision.

2. Maintenance must be in accordance with TCCA Northeast Engineering & Development Ltd. Instructions for Continued Airworthiness No. 960511CA, Issue 3 accepted October 15, 2015 or later TCCA accepted revision. Compliance with Chapter 4, Airworthiness Limitations of the ICA, is mandatory.

Limitations and Conditions: 1. Maintenance must be in accordance with TCCA Northeast Engineering & Development Ltd. Instructions for Continued Airworthiness No. 960511CA, Issue 3 accepted October 15, 2015 or later TCCA accepted revision. Compliance with Chapter 4,

2. If the holder agrees to permit another person to use the certificate to alter the product, the holder shall give the other person Airworthiness Limitations of the ICA, is mandatory.

3. The installer must determine whether this design change is compatible with previously approved modifications. written evidence of that permission.

Date of Application: December 16, 1997 Date Reissued: February 14, 2018 Date of Issuance: March 16, 1998 Date Amended: August 31, 2007; January 03, 2018 By Direction of the Administrator Signature FOR Title Anthony E. Gallo Acting Manager New York ACO Branch Possession of this Supplemental Type propeller. The ST's supporting documentation (drawings, instructions, specifications, flight manual supplements, etc.) is the property of the STC holder.

Page 1 of 2 FAA Form 8110-2 (5/14)

United States of America Department of Transportation Federal Aviation Administration VISTRATIO Supplemental Type Certificate

Transfer Endorsement Transfer the ownership of Supplemental Type Certificate Number: SROO8O5NY To (Name and address of transferee) From (Name and address of grantor) Extent of Authority (if licensing agreement):

Signature of grantor.

The ST's supporting documentation (drawings, instructions, specifications, flight manual supplements, etc.) is the property of the STC holder.

FAA Form 8110-2 (5/14) Page 2 of 2

ITEM Company Helicopter Robinson Company Helicopter Robinson MAKE AIRCRAFT R66 R44 I! K44 MODEL AIRCRAFT 27-1 through 23-44 R00015LA as amended by February 1, 1965, HIINM Part 27 effective NUMBER ALTERATION CERTIFICATE FOR TYPE BASIS ORIGINAL CERTIFICATION INSTALLATION OF BEAR PAWS NORTHEAST ENGINEERING & DEVELOPMENT LTD. FAA APPROVED MODEL LIST (AML) NUMBER SR0080SNY Page 1 of 1 FOR New York Aircraft Certification Branch Acting Manager Fok Anthony E, Gallo FAA Approved: Sas 960501 Data List Ltd. Master Development approved revision. Engineering 2015 or later TCCA Issue 4 dated July 27, Northeast NUMBER AND DATE REVISION NO. DOCUMENT INSTALLATION INSTRUCTIONS slin ICA, is mandatory. Limitations of the Airworthiness Chapter 4, Compliance with accepted revision. later TCCA October 15, 2015 or Issue 3 accepted ICA No. 96051ICA, Development Ltd. Engineering & Northeast NUMBER/DATE AIR WORTHINESS FOR CONTINUED INSTRUCTIONS Reissue Date: February 14, 2018 Issue Date: March 16, 1998 January 3, 2018 DATE AMENDMENT AML

COMPLIANCE AND AIRWORTHINESS DIVISION

NEW YORK AIRCRAFT CERTIFICATION OFFICE BRANCH 1600 STEWART AVENUE, SUITE 410 WESTBURY, NEW YORK 11590 Supplemental Type Certificate ISSUED TO A CANADIAN APPLICANT This STC is official indications of FAA approval of your installation and may be used to authorize identical installation on other aircraft of the same model, subject to the limitation noted in the STC. It may be transferred, or otherwise made available to another party by means of a licensee arrangement; however, you are requested to advise this office when you transfer or grant licensee rights to the STC in order that we may take the necessary recording or reissuance action.

If you plan to manufacture and sell parts for installation on type certificated aircraft, please review FAR 21.502, which is applicable to parts imported into the U.S.

A copy of the STC and required documents should accompany each kit and installation. Also, your attention is directed to the limitations and conditions specified in the STC.

As recipient of this approval, except as provided in FAR21.3(d), you are required to report any failure, malfunction, or defect in any product or part manufactured by you that you have determined has resulted or could result in any of the occurrences listed in FAR 21.3(c).

The report should be communicated initially by telephone and subsequently in writing to the Manager, New York Aircraft Certification Office Branch, telephone (516) 228-7300, mailing address: 1600 Stewart Avenue, Suite 410, Westbury, New York 11590. This first contact should take place within 24 hours after it has been determined that the failure required to be reported has occurred.

FAA Form 8010-4, Malfunction or Defect Report, or any other appropriate format is acceptable in transmitting the required details.

Gaetano Sciortino Manager, New York ACO Branch