STC SR00808SE

FAA Form 8110-2 (11/20) SUPERSEDES PREVIOUS EDITION Page 1 of ___ United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number:

(See Continuation Sheet Page 3 of 3 Pages) SR00808SE Onboard Systems International, LLC 13915 NW 3rd Court Vancouver, WA 98685 Part 27 the Federal Aviation Regulations H3EU Messerschmitt-Bolkow-Blohm BO 105S Fabrication of Onboard Systems Model 200-253-00 (without load weigh) and Model 200-254-00 (with load weigh) Big Mouth Hook Kit and Model 200-290-00 (without load weigh) and Model 200-291-00 (with load weigh) 3.5KK Cargo Hook Kit in accordance with FAA approved Onboard Systems Master Drawing List No. 155-056-00, Revision 4, dated May 14, 2003, Approval of this change in type design applies to only Messerchmitt-Bolkow-Blohm model rotorcraft listed above, which are modified with a FAA approved installation of a Breeze Eastern P/N 14027-6 hook per STC SH286NE. This approval should not be extended to rotorcraft of these models on which other previously approved modifications are incorporated unless it is determined by the installer that the relationship between this change and any of those other previously approved modifications, including changes in type design, will introduce no adverse effect upon the airworthiness of that rotorcraft.

March 31, 2000 October 7, 2021 June 5, 2000 May 1, 2001; January 13, 2003;

September 11, 2003 For Acting Manager, Seattle ACO Branch 3

FAA Form 8110-2 (11/20) SUPERSEDES PREVIOUS EDITION Page 2 of ___ United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number:

SR00808SE 3

FAA Form 8110-2 (11/20) SUPERSEDES PREVIOUS EDITION Page ___ of ___ United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number:

End Description of Type Design Change:(Continued) Limitations and Conditions:

SR00808SE or later FAA approved revision; and installation of these replacement cargo hooks in accordance with FAA approved Onboard Systems Owner’s Manuals No. 120 088-00, Revision 4, dated January 23, 2003, for the Big Mouth Hook Kit and No. 120-110-00, Revision 0, dated April 4, 2003, for the 3.5KK Cargo Hook Kit, or later FAA approved revisions. This modification must be inspected in accordance with Section 5 of the Onboard Systems Owner’s Manual No. 120-088-00, Revision 4, dated January 23, 2003, for the Big Mouth Hook Kit and Section 5 of the Onboard Systems Owner’s Manual No. 120 110 00, Revision 0, dated April 4, 2003, and FAA approved Onboard Systems Cargo Hook Service Manual No.

122-005-00, dated October 10, 2002, for the 3.5KK Cargo Hook Kit, or later FAA approved revisions.

3 3 Modified rotorcraft must be operated in accordance with an FAA approved copy of Onboard Systems Rotorcraft Flight Manual Supplement (RFMS) No. 120-088-00, dated June 5, 2000, for the Big Mouth Kit and Onboard Systems Rotorcraft Flight Manual Supplement (RFMS) No.

121-018-00, Revision 0, dated September 11, 2003, for the 3.5KK Cargo Hook Kit, or later FAA approved revisions. A copy of this Certificate, Owner’s Manual, Service Manual and the FAA approved RFMS must be maintained as a part of the permanent records of the modified rotorcraft.

If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.