STC SR00840DE

Supplemental type certificate · Rosen Sunvisor Systems LLC

Holder
Rosen Sunvisor Systems LLC · United States
Status
Current · Issued
Status date
November 14, 2016
Applied
November 13, 2015
Product
Aircraft · Rotorcraft
Certification basis
Part 21, Part 27

From FAA DRS, with our copy of the certificate PDF. DRS record last changed December 5, 2025.

What it approves

Installation of the Rosen Sunvisor System into the Robinson R22. R44 and R66

What the certificate saysOCR

This is OCR from the scanned FAA certificate. OCR can misread letters and numbers.

United States of America Department of Transportation Federal Aviation Administration TOMINIS 187 Supplemental Type Certificate Number: SR00840DE This certificate issued to: Rosen Sunvisor Systems, LLC.

86365 College View Road Eugene, Oregon 97405 Part _of the Federal Aviation Regulations.

Original Product - Type Certificate Number: Seethe attached FAA Approved Model List-AML No. SR00840DE for the approved aircraft; Type Certificate Numbers, Make and Description of Type Design Change:

Installation of the Rosen Sunvisor System into the Robinson R22, R44 and R66 in accordance with Rosen MDL 2091000-DL (Doc # 9050-2091-001) (refer to AML SR00840DE for revision and date) Limitations and Conditions:

1. Aircraft with this STC installed shall be maintained in accordance with the Instructions for Continued Airworthiness Document: "Product Maintenance Manual with Illustrated Parts List and Instructions for Continued Airworthiness", 9100- 2091-000, unless other methods, techniques and practices for maintaining this STC have been accepted by the FAA.

2. The installer is responsible for determining whether this design change is compatible with previously approved Alterations.

3. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

4. A copy of this certificate must be maintained as part of the permanent record of the altered aircraft.

Date of Application: March 13, 2015 Date Reissued:

Date of Issuance: November 14, 2016 Date Amended:

By Direction of the Administrator Signature for T.Dixan Todd Dixon Title: Manager Denver Aircraft Certification Office Northwest Mountain Region

FAA Form 8110-2 (5/14) Page 1 of 2

U.S. Department of Transportation Aviation Safety Seattle ACO Branch Federal Aviation Aircraft Certification Service 2200 S 216th Street Administration Compliance & Airworthiness Division Des Moines, WA 98198-6547 JUL: 17 2019 In Reply Refer To: 785-19-7665 Mr. Gary Hanson 86365 College View Road Eugene, OR 97405 Dear Mr. Hanson:

We have completed our evaluation of the request to reissue Approved Model List (AML) SR00840DE, to add models of the various series of Robinson rotorcraft on the AML. We find that you have satisfactorily demonstrated compliance with the applicable certification regulations. Accordingly, we have enclosed STC AML SR00840DE, reissued on July 17, 2019, for the installation in accordance with Drawing List 2091000-DL, Revision E, dated June 25, 2019, and maintained in accordance with Product Maintenance Manual/Instructions for Continued Airworthiness 9100-2091-000, Revision B, dated October 13, 2016, as listed on the AML, or later Federal Aviation Administration (FAA) approved revision.

This AML is official Federal Aviation Administration (FAA) approval for your installation and may be used to authorize identical installations on other aircraft of the same model. It may be transterred or otherwise made available to another party by means of a licensee arrangement in accordance with Title 14 Code of Federal Regulations (CFR) section (§)

21.47. You are required to advise this office prior to the transfer, when you transter or grant licensee rights to the STC, in order that we may take the necessary recording or reissuance action.

If you agree to permit another person to use this AML to alter the product, it is your responsibility to give the other person written evidence of that permission in the form of a "permission statement." This permission statement should contain the agreement specifying the product to be altered, the AML number, and the person who is being given the consent to use the AML.

As recipient of this approval, except as provided in § 21.3(d), you are required to report any tailure, maltunction, or detect in any product or article manufactured by you that you have determined has resulted or could result in any of the occurrences listed in § 21.3(c). The report should be communicated initially by telephone to the Manager, Cabin Safety and Environmental Systems Section, AIR-785, telephone number (206) 231-3500, within 24 hours after it has been determined that the failure has occurred. In addition, written notification to the Manager, Seattle ACO Branch, AIR-780, at the above address is required.

FAA Form 8010-4 (Malfunction or Defect Report) or any other appropriate format is acceptable in transmitting the required details.

785-19-7665 If you plan to manufacture replacement or modification articles for sale in conformance with approved data listed on the certificate, a parts manufacturer approval (PMA) may be applied for under the provisions of § 21.303 and issued after establishing compliance with § 21.307 and § 21.308. The identification requirements for articles produced under a PMA are in § 45.15. Your application may be in letter form, with reference to the STC number, and should be addressed to the Federal Aviation Administration, Northwest Mountain Region, Attention: Manager, Seattle MIDO Section, 2200 S. 216th Street, Des Moines, WA 98198-6547.

Since I am very much interested in the service we provide to the aviation community and the public, it would be helpful if you would provide your thoughts and comments regarding how the approval process went. To gather this information, we have provided this letter and its enclosures electronically and attached a short survey that I hope you will fill out and return via e-mail as indicated on the survey. Please make the subject line of the return email read "Survey" to ensure proper receipt. You may rest assured that your comments will receive my full attention and that I will hold your comments in strict confidence, should you request I do so. Please note that this stakeholder survey is common to all Aircraft Certification offices within the FAA's Aircraft Certification Service and is aimed at enabling the Aircraft Certification Service to deliver the best services to each of our stakeholders.

Sincerely, B.

Ross Landes Aviation Safety Manager, Seattle АСО Branch Compliance & Airworthiness Division Aircraft Certification Service Enclosure

ISSUE DATE: November 14, 2016 AML FAA Approved Rev Aircraft Flight Manual Supplement Date Revision/ Date 11/14/16 Not Applicable Not 7/17/19 Applicable 7/17/19 Not Applicable 7/17/19 Not Applicable 11/14/16 Not Applicable 7/17/19 Not Applicable 11/14/16 Not Applicable (3) ICA is at the revision level shown or later "Accepted" or unless other methods, techniques and practices for maintaining this STC have Federal Aviation Administration (FAA) APPROVED MODEL LIST (AML) SR00840DE Drawing Not Applicable Not Applicable Not Applicable Not Applicable Not Applicable Not Applicable Not Applicable (2) Airworthiness Limitations, as part of the ICA (AWL), is at the revision level shown later FAA "Approved" revision Instructions For Airworthiness (ICA) Revision/ Date 10/13/16 (2) (3) 10/13/16 (2)(3) 10/13/16 (2)(3) 10/13/16 (2)(3) 10/13/16 (2 3) 10/13/16 (2)(3) 10/13/16 Continued INSTALLATION OF ROSEN SUNVISOR SYSTEM Number 9100-2091- 000 9100-2091- 000 9100-2091- 000 9100-2091- 000 9100-2091- 000 9100-2091- 000 9100-2091- 000 July 17, 2019 FOR FAA Approved Master Drawing List Revision/ Number Date MDL 2091000-DL 6/25/19 (Doc # 9050- 2091-001) MDL 2091000-DL 6/25/19 (Doc # 9050- 2091-001) MDL 2091000-DL 6/25/19 (Doc # 9050- 2091-001) MDL 2091000-DL 6/25/19 (Doc # 9050- 2091-001) MDL 2091000-DL 6/25/19 (Doc # 9050- 2091-001) MDL 2091000-DL 6/25/19 (Doc # 9050- 2091-001) MDL 2091000-DL 6/25/19 (Doc # 9050- 2091-001) NOTES: (1) The MDL is at the revision level shown or later FAA "Approved" revision FAA Approved: AMENDED: REISSUED: Page 1 of 1 Certification Basis for Alteration Amdt. 27-44 Amdt. 27-44 Amdt. 27-44 Amdt. 27-44 Amdt. 27-44 Amdt. 27-44 Amdt. 27-44 Original TC Number H10WE H10WE H10WE H10WE H11NM H11NM R00015LA been accepted by the FAA Aircraft Model R22 R22 Alpha R22 Beta R22 Mariner R44 R44 I1 R66 Aircraft Make Robinson Robinson Robinson Robinson Robinson Robinson Robinson Item

ADs that name this STC · 0

An AD can apply because an STC is installed, or mention one in its text.

No AD in this release names this STC

Approved models · 7

MakeModelData sheet
Robinson Helicopter CompanyR22H10WE
Robinson Helicopter CompanyR22 ALPHAH10WE
Robinson Helicopter CompanyR22 BETAH10WE
Robinson Helicopter CompanyR22 MARINERH10WE
Robinson Helicopter CompanyR44H11NM
Robinson Helicopter CompanyR44 IIH11NM
Robinson Helicopter CompanyR66R00015LA

Every issue · 1

DRS keeps each issue of an STC as its own record, with its own certificate and attachments.

DateStatusFiles
November 14, 2016Issued, currentCertificateAML_SR00840DE