STC SR00953NY

Supplemental type certificate · Dart Aerospace Limited

Holder
Dart Aerospace Limited · Canada
Status
Current · Amended
Status date
March 5, 2008
Applied
March 26, 1999
Product
Aircraft · Rotorcraft
Certification basis
Part 21
Data sheet
TCDSH1SW

From FAA DRS, with our copy of the certificate PDF. DRS record last changed December 6, 2025.

What it approves

Installation of adjustable engine mounts.

What the certificate says

From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.

Part 7 of the Civil Air Regulations.

Configuration 1: Installation of adjustable engine mounts is to be completed in accordance with Aero Consulting Services Modification Data Summary B80700, Revision D, dated October 9, 2003, or later Transport Canada approved revision.

Configuration 2: Installation of adjustable engine mounts is to be completed in accordance with Dart Aerospace Ltd. Installation Instructions report number IIN-D205-708, Revision A, dated July 20, 2005, or later Transport Canada approved revision.

1. For Configuration 1, powerplant alignment procedures are supplemented by the following Aero Consulting Services Maintenance Manual Supplements:

a. ACS MMS B80771, Revision N/C, for the Model 204B

b. ACS MMS B80772, Revision B, for the Models 205A-1 and 205B

2. For Configuration 2, maintenance of the installation is in accordance with Dart Aerospace Ltd. Instructions for Continued Airworthiness, report number ICA-D205-708, Revision 0, dated July 25, 2005.

Dart Aerospace Ltd.

1270 Aberdeen Street Hawkesbury, ON K6A 1K7 Canada H1SW Make: Bell Helicopter Textron Model: 204B, 205A-1, 205B Date reissued: April 5, 2004

Date amended: June 27, 2000, January 25, 2002, February 26, 2004, March 5, 2008 By direction of the Administrator

( Signature) Anthony Socias Manager New York Aircraft Certification Office

(Title)

Date of application: March 26, 1999

Date of issuance: April 28, 1999

FAA Form 8110-2-1(10-69) Page 2 of 2

Number SR00953NY Date of Amendment: March 5, 2008

3. The installer must determine whether this design change is compatible with previously approved modifications.

4. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

--------END--------

ADs that name this STC · 0

An AD can apply because an STC is installed, or mention one in its text.

No AD in this release names this STC

Approved models · 3

MakeModelData sheet
Bell Helicopter Textron204BH1SW
Bell Helicopter Textron205A-1H1SW
Bell Helicopter Textron205BH1SW