STC SR01104SE

Supplemental type certificate · Aerometals

Holder
Aerometals · United States
Status
Current · Reissued
Status date
March 1, 2005
Applied
February 27, 2002
Product
Aircraft · Rotorcraft
Certification basis
Part 21
Data sheet
TCDSH3WE

From FAA DRS, with our copy of the certificate PDF. DRS record last changed December 6, 2025.

What it approves

Fabrication of AMC AM369D21800-501 Tail Rotor Pitch Control Assembly

What the certificate says

From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.

United States of America Department of Transportation_Federal Aviation Administration Supplemental Type Certificate Number SR01104SE This certificate, issued to Aerometals 3920 Sandstone Drive El Dorado Hills, CA 95762 Part 6 of the Civil Air Regulations.

Original ProductType Certificate Number: H3WE Make: MDHI Model: 369D, 369E, and 369FF

Description of the Type Design Change: Fabrication of AMC AM369D21800-501 Tail Rotor Pitch Control Assembly in accordance with AMC Master Drawing List No. AMC-01, Revision A, dated April 1, 2002, or later Federal Aviation Administration (FAA) approved revision; and installation of this assembly in accordance with the Maintenance Manual for the rotorcraft, Document Number CSP-HMI-2, Section 64-30-00, “Tail Rotor Pitch Control Assembly, Revision 21, or later FAA approved revision. This modification must be maintained in accordance with the MDHI Service and Maintenance instructions, Document Number CSP-HMI-2, Chapter 05, Revision 25, dated April 28, 2000, or later FAA approved revision.

Limitations and Conditions: Approval of this change in type design applies to MDHI rotorcraft listed above only. This approval should not be extended to other rotorcraft of this model on which other previously approved modifications are incorporated unless it is determined that the relationship between this change and any other previously approved modifications, including changes in type design, will introduce no adverse effect upon the airworthiness of that helicopter. A copy of this Certificate, and the Service and Maintenance Instructions must be maintained as part of the permanent record of the modified helicopter.

If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

Date of application: February 27, 2002 Date reissued: March 1, 2005 Date of issuance: July 8, 2002 Date amended: May 5, 2004

(Signature) Acting Manager, Seattle Aircraft Certification Office (Title)

ADs that name this STC · 0

An AD can apply because an STC is installed, or mention one in its text.

No AD in this release names this STC

Approved models · 3

MakeModelData sheet
MD Helicopter Inc.369DH3WE
MD Helicopter Inc.369EH3WE
MD Helicopter Inc.369FFH3WE