STC SR01183SE

Supplemental type certificate · Simplex Manufacturing Company

Holder
Simplex Manufacturing Company · United States
Status
Current · Issued
Status date
February 28, 2003
Applied
August 26, 2002
Product
Aircraft · Rotorcraft
Certification basis
Part 21, Part 27
Data sheet
TCDSH7EU

From FAA DRS, with our copy of the certificate PDF. DRS record last changed December 6, 2025.

What it approves

Fabrication of Simplex Model 923 adjustable cargo mirror system in accordance with Simplex Master Drawing List No. MDL 923 Revision A, dated November 14, 2002 or later Federal Aviation Administration (FAA) approved revision; and installation of this system in accordance with Simplex Installation Manual No. 923-102 002-001, Revision I/R, dated August 12, 2002, or later FAA approved revision. This modification must be maintained in accordance with Simplex Maintenance Manual Document No. 923-102 005-001, Revision I/R, dated November 21, 2002, or later FAA approved revision.

What the certificate says

From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.

Number SR01183SE This certificate, issued to Simplex Manufacturing Company 13340 Whitaker Way Portland, OR 97230 Part 27 of the Federal Aviation Regulations.

Original ProductType Certificate Number: H7EU Make: Agusta S.p.A.

Model: A119

Description of the Type Design Change : Fabrication of Simplex Model 923 adjustable cargo mirror system in accordance with Simplex Master Drawing List No. MDL 923 Revision A, dated November 14, 2002 or later Federal Aviation Administration (FAA) approved revision; and installation of this system in accordance with Simplex Installation Manual No. 923-102 002-001, Revision I/R, dated August 12, 2002, or later FAA approved revision. This modification must be maintained in accordance with Simplex Maintenance Manual Document No. 923-102 005-001, Revision I/R, dated November 21, 2002, or later FAA approved revision.

Limitations and Conditions : Approval of this change in type design applies to Agusta Model A119 rotorcraft only. This approval should not be extended to other rotorcraft of this model on which other previously approved modification are incorporated unless it is determined that the relationship between this change and any other previously approved modifications, including changes in type design, will introduce no adverse effect upon the airworthiness of that helicopter. Rotorcraft modified in accordance with this STC must be operated in accordance with an FAA approved copy of the Rotorcraft Flight Manual Supplement (RFMS), Simplex Document No. 923-102 003-001, Revision I/R, FAA approved February 28, 2003, or later FAA approved revision. A copy of this Certificate, FAA approved RFMS, and Maintenance Manual must be maintained as part of the permanent record of the modified helicopter.

If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

This certificate and the supporting data which is the ba sis for approval shall remain in effect until surrendered, suspended, revoked, or a termination date is otherwise established by the Administrator of the Federal Aviation Administration.

Date of application: August 26, 2002 Date reissued:

Date of issuance: February 28, 2003 Date amended:

(Signature) Acting Manager, Seattle Aircraft Certification Office (Title)

ADs that name this STC · 0

An AD can apply because an STC is installed, or mention one in its text.

No AD in this release names this STC

Approved models · 1

MakeModelData sheet
Agusta S.p.A.A119H7EU