What it approves
Manufacture of interior trim parts.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
N umber SR01339AT This certificate issued to
Part 21.29/27 of the Federal Aviation R egulations.
Original Product -- Type Certificate N umber :
Manufacture of interior trim parts in accordance with Aeronautical Accessories, Inc.
Drawing List Report No. AA-96164, Revision A, dated March 27, 1997, and installation per Report No. AA-96165, Revision B, dated March 11, 1997, or later FAA approved revision.
The installer must determine whether this design change is compatible with previously approved modifications. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.
Bell Helicopter Textron, Inc.
441 Industrial Park Rd.
Piney Flats, TN 37686 H2SW M ake : Bell Helicopter Textron Canada M odel : 407 Date of application : September 17, 1996
Date of issuance : July 09, 1997
Date reissued : February 01, 2011
B y direction of the A dministrator
(Signature) James A. Richmond, Acting Manager, Rotorcraft Certification Office, Southwest Region
(Title)
FAA Form 8110-2-1(10-69) Page 2 of 2
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| Bell Helicopter Textron (Canada) | 407 | H2SW |