What it approves
Fabrication of AMC Part Number AM369A1231 droop stop roller assembly.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
United States of America Department of Transportation_Federal Aviation Administration Supplemental Type Certificate Number SR01551SE This certificate, issued to Aereometals 3920 Sandstone Drive El Dorado Hills, CA 95762 Part 6 of the Civil Air Regulations.
Original Product⎯Type Certificate Number: H3WE Make: MD Helicopters, Inc.
Model: 369A, 369D, 369E, 369FF, 369HE, 369HM, 369HS, 500N, 600N
Description of the Type Design Change: Fabrication of AMC Part Number AM369A1231 droop stop roller assembly in accordance with AMC Master Drawing List No. MDL-AMC-018, Revision A, dated September 15, 2004, or later Federal Aviation Administration (FAA) approved revision. The droop stop roller assembly must be installed in accordance with AMC Installation Instructions AMC-MI-04002, Revision IR, dated June 22, 2004, or later FAA approved revision.
Limitations and Conditions: Approval of this change in type design applies to the rotorcraft models listed above only. This approval should not be extended to other rotorcraft of this model on which other previously approved modifications are incorporated unless it is determined that the relationship between this change and any of those other previously approved modifications, including changes in type design, will introduce no adverse effects upon the airworthiness of that rotorcraft. A copy of this Certificate must be maintained as part of the permanent record of the modified rotorcraft. This is a direct replacement part, and the FAA has determined that no Instructions for Continued Airworthiness are required.
If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
Date of application: July 7, 2004 Date reissued: June 28, 2006 Date of issuance: May 19, 2005 Date amended:
(Signature) Acting Manager, Seattle Aircraft Certific ation Office (Title)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.