STC SR01574SE

United States of America Department of Transportation_Federal Aviation Administration Supplemental Type Certificate Number SR01574SE This certificate, issued to Precision Helicopters, Inc.

17770 NE Aviation Way New berg, OR 97132 Part 6 of the Civil Air Regulations.

Original Product⎯Type Certificate Number: H3WE Make: MD Helicopters, Inc.

Model: 369D

Description of the Type Design Change: Fabrication of Camera Mount in accordance with Isolair Master Document List No. 4900, Revision A, dated November 10, 2004, or later Federal Aviation Administration (FAA) approved revision. The Camera Mount must be installed and maintained in accordance with Precision Helicoptes, Inc. Document No. PHI-369D-001, Revision N/A, dated April 25, 2005, or later FAA approved revision.

Limitations and Conditions: Approval of this change in type design applies to the rotorcraft models listed above only. This approval should not be extended to other rotorcraft of these models on which other previously approved modifications are incorporated unless it is determined that the relationship between this change and any of those other previously approved modifications, including changes in type design, will introduce no adverse effects upon the airworthiness of that rotorcraft.

Rotorcraft modified in accordance with this STC must be operated in accordance with an FAA approved copy of the Precision Helicopters, Inc. Rotorcraft Flight Manual Supplement (RFMS), PHI- 369D-005, Revision Initial Release, dated July 8, 2005, or later FAA approved revision. A copy of this Certificate must be maintained as part of the permanent record of the modified rotorcraft.

If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

Date of application: October 21, 2004 Date reissued:

Date of issuance: July 8, 2005 Date amended:

(Signature) Acting Manager, Seattle Aircraft Certification Office (Title)