STC SR01583SE

Supplemental type certificate · Dart Aerospace USA Inc.

Holder
Dart Aerospace USA Inc. · United States
Status
Current · Reissued
Status date
October 17, 2018
Applied
April 18, 2005
Product
Aircraft · Rotorcraft
Certification basis
Part 21

From FAA DRS, with our copy of the certificate PDF. DRS record last changed December 6, 2025.

What it approves

Fabrication and installation of Dart D412-742 Float Skidtube.

What the certificate says

From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.

United States of Am erica Department of Transportation - Federal Aviation Administration Supplemental Type Certificate (This STC is a duplicate original to replace the original which was lost. Issued 04/07/06) Number SR01583SE This certificate, issued to Dart Aerospace USA, Inc.

3845 NE 30th Avenue Hillsboro, OR 97124 Part * of the * Regulations.

Original ProductType Certificate Number: * See attached Federal Aviation Administration (FAA) Make: Approved Model List (AML) SR01583SE for approved Model: aircraft models and applicable airworthiness regulations

Description of the Type Design Change: Fabrication of Dart D412-742 Float Skidtube in accordance with Dart Aerospace USA, Inc. Drawing List No. MDL-D412-742, Revision B, dated June 21, 2005, or later FAA-approved revision; and installation of this system in accordance with Installation Instructions, Document No. IIN-D412-742, Revision A, dated February 8, 2005, or later FAA approved revision. This modification must be maintained in accordance with Instructions for Continued Airworthiness, Document No. ICA-D412-742, Revision 0, dated February 10, 2005, or later FAA-approved revision.

Limitations and Conditions: This approval should not be extended to other rotorcraft of this model on which other previously approved modifications are incorporated unless it is determined by the installer that the relationship between this change and any of those other previously approved modifications, including changes in type design, will introduce no adverse effect upon the airworthiness of that rotorcraft. A copy of this Certificate and Instructions for Continued Airworthiness must be maintained as part of the permanent records for the modified rotorcraft.

If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

Date of application: April 18, 2005 Date reissued: October 28, 2015; October 17, 2018 Date of issuance: July 29, 2005 Date amended: April 7, 2006

(Signature)

Manager, Seattle Aircraft Certification Office (Title)

ADs that name this STC · 0

An AD can apply because an STC is installed, or mention one in its text.

No AD in this release names this STC

Approved models · 10

MakeModelData sheet
Agusta S.p.A.AB412H79EU
Agusta S.p.A.AB412 EPH79EU
Bell Helicopter Textron205AH1SW
Bell Helicopter Textron205A-1H1SW
Bell Helicopter Textron205BH1SW
Bell Helicopter Textron210H1SW
Bell Helicopter Textron212H4SW
Bell Helicopter Textron412H4SW
Bell Helicopter Textron412CFH4SW
Bell Helicopter Textron412EPH4SW

Every issue · 4

DRS keeps each issue of an STC as its own record, with its own certificate and attachments.

DateStatusFiles
October 17, 2018Reissued, currentCertificateApproved model list
October 28, 2015Reissued, earlier issueCertificateApproved model list
April 7, 2006Amended, earlier issueCertificateApproved model list
July 29, 2005Issued, earlier issueCertificatesr01583seaml