What it approves
Description of Type Design Change: Installation of main rotor blades, P/N 206B2100-101, in accordance with Van Horn Aviation, L.L.C. Master Document List (MDL), 206B-MDL-001, Revision C, dated February 5, 2004, and Bonded Structures Ltd. Installation and Maintenance Manual, Manual No. VMM-301, Revision N/C, dated February 9, 2004, or later FAA Approved Revisions.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
This Certificate issued to Van Horn Aviation, L.L.C.
1000 E. Vista Del Cerro Drive Tempe, Arizona 85281 Part 27* of the Federal Aviation Regulations. *Certification basis is set forth in Type Certificate Data Sheet H2SW Original Product Type Certificate Number :
H2SW Bell Helicopter Textron 206A, 206B Description of Type Design Change: Installation of main rotor blades, P/N 206B2100-101, in accordance with Van Horn Aviation, L.L.C. Master Document List (MDL), 206B-MDL-001, Revision C, dated February 5, 2004, and Bonded Structures Ltd. Installation and Maintenance Manual, Manual No. VMM- 301, Revision N/C, dated February 9, 2004, or later FAA Approved Revisions.
Limitations and Conditions: The installation should not be incorporated in any aircraft unless it is determined that the interrelationship between this installation and any previously approved configuration will not introduce any adverse effect upon the airworthiness of the aircraft. The approval of this modification applies to the above noted helicopter models only. A copy of this STC must be included in the permanent records of the modified aircraft. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
Date of application : July 20, 2001
Date of issuance : February 27, 2004
( Signature) Manager, Airframe Branch Los Angeles Aircraft Certification Office ( Title)
Transfer the ownership of the Supplemental Type Certificate Number to (Name of transferee) (Address of transfer) (Number and street)
(City, State, and Zip code) from (Name of grantor) (Print or type) (Address of grantor) (Number and street)
(City, State, and Zip code) Extent of Authority (if licensing agreement):
Signature of grantor (In ink):
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.