STC SR01592SE

United States of America Department of Transportation_Federal Aviation Administration Supplemental Type Certificate Number SR01592SE This certificate, issued to Heli-Trade Corporation 90451 Boeing Drive Eugene, OR 97402

Part * of the * Regulations.

Original Product⎯Type Certificate Number: * See attached FAA Approved Model list (AML) Make: No. SR01592SE for a list of approved rotorcraft Model: models and applicable airworthiness regulations.

Description of the Type Design Change: Installation and Maintenance of Goodrich Internal Rescue Hoist, in accordance with Heli-Trade Master Drawing List HT-415-MDL, Revision IR, dated August 10, 2005, or later FAA approved revisions.

Limitations and Conditions: Approval of this change in type design applies to the above rotorcraft only. This approval should not be extended to other rotorcraft on which other previously approved modifications are incorporated unless it is determined that the relationship between this change and any other previously approved modifications, including changes in type design, will introduce no adverse effect upon the airworthiness of that rotorcraft. Rotorcraft modified in accordance with this STC, must be operated in accordance with the FAA approved copy of the Rotorcraft Flight Manual Supplement, Document FMS-415-29.1581, FAA Approved August 12, 2005. A copy of this Certificate must be maintained as part of the permanent records for the modified rotorcraft.

If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission. (See Continuation Sheet page 3.)

Date of application: February 25, 2005 Date reissued:

Date of issuance: August 22, 2005 Date amended: November 15, 2005

(Signature) Acting Manager, Seattle Rotorcraft Certific ation Office (Title)

Number SR01592SE

Issued to: Heli-Trade Corporation Date of Issuance August 22, 2005 Date Amended: November 15, 2005 Limitations and Conditions: (cont’d)

In order to operate the internal hoist kit in the referenced airframes, the following provision kits must be installed:

Hoist Part Number Bell Provision Kit Bell Service Instruction Rotorcraft S/N Effectivity HTC-42305A 205-706-091-1 BHT-205-SI-44 205A-1 30001-30228 HTC-42305A 205-706-091-1 BHT-205-SI-44 205B 30351 and Sub.

HTC-42305A 205-706-091-101 BHT-205-SI-44 205A-1 30229-30350 HTC-42305A 212-706-013-11 BHT-212-SI-85 212 30680-31311 HTC-42305A 212-706-013-11 BHT-212-SI-85 212 35001-35010 HTC-42305A 212-706-013-103 BHT-212-SI-85 212 35011 and Sub.

HTC-42305A 214-706-013-1 BHT-214-SI-1 214ST 28201 and Sub.

HTC-42305A 412-706-011-105 BHT-412-SI-32 412 33001 and Sub.