STC SR01638SE

Number SR01638SE

This certificate, issued to: Fliegen Works, Inc.

921 SE 47th Avenue Portland, OR 97215

Part 29 of the Federal Aviation Regulations.

Original ProductType Certificate Number: H9SW Make: Bell Model: 430

Description of the Type Design Change: Fabricate and Install the emergency medical equipment; Infant Transport Module including: incubator, medical oxygen, delivery, and monitoring equipment per the Fliegen Works, Inc. Master Drawing List FW-ECH340-90, Revision B, dated August 30, 2005, or later FAA-approved revision.

Limitations and Conditions: The modified rotorcraft must be maintained in accordance with the Instructions for Continued Airworthiness (ICA), Fliegen Works, Inc. Document FW-ECH340-13-BHT430, Revision IR dated June 17, 2005, or later FAA-accepted revision. The modified rotorcraft must be operated in accordance with the Rotorcraft Flight Manual Supplement (RFMS), Fliegen Works, Inc. Document FW-ECH340-11–BHT, Revision IR, FAA-approved January 30, 2006, or later FAA-approved revision.

Approval of this change in type design applies to the above rotorcraft only. This approval should not be extended to other aircraft of this model on which other previously approved modifications are incorporated unless it is determined by the installer that the relationship between this change and any of those other previously approved modifications, including changes in type design, will introduce no adverse effect upon the airworthiness of that rotorcraft.

A copy of this Certificate, RFMS, and ICA must be maintained as part of the permanent records for the modified rotorcraft.

If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

Date of application: July 17, 2005 Date reissued: January 19, 2010 Date of issuance: February 01, 2006 Date amended:

(Signature) Acting Manager, Seattle Aircraft Certification Office (Title) Original Signed by Philip L. Forde