What it approves
Installation of Airfilm Model G1 Nose Mounted Utility Bracket.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
This Certificate issued to Airfilm Camera Systems 6245 Aerodrome Way Hangar No. 2 Georgetown, California 95634 Part 27 of the Federal Aviation Regulations.
H2SW Bell
206, A, B, B1, L, L1, L3, L4, 407.
Description of Type Design Change: Installation of Airfilm Model G1 Nose Mounted Utility Bracket and/or G3 Landing Light on Bell 206/407 Series rotorcraft in accordance with FAA Approved Airfilm Camera Systems Master Drawing List No. AF-G1-010, Revision N/C, dated April 14, 2004, and/or AF-G3-010, Revision, N/C, dated April 14, 2004. Rotorcraft Flight Manual G1-206-005 dated September 8, 2004, or later FAA Approved Revision. Instructions for Continued Airworthiness AF-G1-008, Revision NC, dated April 14, 2004, and/or Instructions for Continued Airworthiness AF-G3-008, Revision NC, dated April 14, 2004.
Limitations and Conditions: This approval should not be extended to rotorcraft of this model on which other previously approved modifications are incorporated unless it is determined that the relationship between this change and any of those other previously applied modifications, including changes in type design, will introduce no adverse effect upon the airworthiness of that rotorcraft. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
A copy of this Certificate must be maintained as part of the permanent records for the modified aircraft.
This certificate and the supporting data, which is the basis for approval, shall remain in effect until surrendered, suspended, revoked or a termination date is otherwise established by the Administrator of the Federal Aviation Administration.
Date of application: August 8, 2003
Date of issuance: September 10, 2004
Date reissued: March 1, 2006
Date amended: June 6, 2008
( Signature)
Manager, Technical & Administrative Support Staff, Los Angeles Aircraft Certification Office (Title)
NOTE:
DO NOT DELETE THIS PAGE.
DO NOT ADD ANY DATA TO THIS PAGE.
THIS PAGE IS FOR PAGE NUMBERING PURPOSES, PLEASE DISCARD PRINTED COPY.
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 9
| Make | Model | Data sheet |
|---|---|---|
| Bell Helicopter Textron (Canada) | 206 | H2SW |
| Bell Helicopter Textron (Canada) | 206A | H2SW |
| Bell Helicopter Textron (Canada) | 206B | H2SW |
| Bell Helicopter Textron (Canada) | 206B-1 | H2SW |
| Bell Helicopter Textron (Canada) | 206L | H2SW |
| Bell Helicopter Textron (Canada) | 206L-1 | H2SW |
| Bell Helicopter Textron (Canada) | 206L-3 | H2SW |
| Bell Helicopter Textron (Canada) | 206L-4 | H2SW |
| Bell Helicopter Textron (Canada) | 407 | H2SW |
Every issue · 2
DRS keeps each issue of an STC as its own record, with its own certificate and attachments.
| Date | Status | Files |
|---|---|---|
| June 6, 2008 | Reissued, current | Certificate |
| March 1, 2006 | Reissued, earlier issue | Certificate |