STC SR01688LA

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate FAA Form 8110-2 (03/21) Page 1 of 3 22___

Number: SR01688LA

This certificate issued to: Airfilm Camera Systems LLC 6245 Aerodrome Way, Hangar No. 2 Georgetown, California 95634

Part 27* of the Federal Aviation Regulations.

*Certification basis is set forth in Type Certificate Data Sheet TCDS.

Make: **See attached FAA Approved Model List (AML) Model: No. SR01688LA for list of approved rotorcraft *models and applicable airworthiness regulations.

Description of Type Design Change: Installation of Aero Pacific Belly Utility Mount in accordance with FAA Approved Master Drawing List No. 20602, Revision A, dated February 11, 2005, and a copy of FAA Approved Rotorcraft Flight Manual Supplement No. AP206-UM02-10, issued March 22, 2005, or later FAA Approved Revisions.

Limitations and Conditions: Approval of this change in type design applies to the aircraft models listed on AML No. SR01688LA only. This approval should not be extended to aircraft of this model on which other previously approved modifications are incorporated unless it is determined that the relationship between this change and any of those other previously approved modifications, including changes in type design, will introduce no adverse effect upon the airworthiness of that aircraft. (Continued)

Date of Application: December 20, 2003 Date Reissued: January 10, 2018; February 9, 2024

Date of Issuance: April 7, 2005 Date Amended:

Title: For Gregory S. Dilibero Manager, West Certification Branch Compliance & Airworthiness Division Aircraft Certification Service

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate FAA Form 8110-2 (03/21) Page 2 of 3 22___

Number: SR01688LA

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate FAA Form 8110-2 (03/21) Page 3 of 3 22___

Number SR01688LA

The provisions of the Supplemental Type Certificate are applicable only to those aircraft which are listed on the attached FAA Approved Model List of Bell 206 Series and 407 Helicopter models.

This Belly Utility Mount Installation is approved for a maximum weight of not more than 150 pounds and a frontal area of 2.5 square feet.

This STC addresses only FAR 27, Subpart B, flight and C strength requirements.

A copy of this certificate and FAA Approved Model List (AML) No. SR01688LA, dated April 7, 2005, or later FAA Approved revision, must be maintained as part of the permanent records for the modified aircraft. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

- END -