STC SR01785LA

Supplemental type certificate · Airfilm Camera Systems

Holder
Airfilm Camera Systems · United States
Status
Current · Reissued
Status date
June 22, 2018
Applied
February 19, 2005
Product
Aircraft · Rotorcraft
Certification basis
Part 21, Part 27

From FAA DRS, with our copy of the certificate PDF. DRS record last changed December 6, 2025.

What it approves

Installation of Airfilm Single Pole Utility Bracket.

What the certificate says

From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.

Number SR01785LA

This Certificate issued to

Part * of the Federal Aviation Regulations. * Airfilm Camera Systems 6245 Aerodrome Way/Hangar No. 2 P.O. Box 1352 Georgetown, CA 95634

** See attached FAA Approved Model List (AML)

No. SR01785LA for list of approved rotorcraft

* models and applicable airworthiness regulations.

Installation of Airfilm Single Pole Utility Bracket in accordance with FAA Approved Master Drawing List No. AFSP-010, Revision N/C, dated February 17, 2005, and a copy of FAA Approved Rotorcraft Flight Manual Supplement No. AFSP-005, issued May 12, 2005 or later FAA Approved Revisions.

Limitations and Conditions: Approval of this change in type design applies to the aircraft models listed on AML No. SR01785LA only. This approval should not be extended to aircraft of this model on which other previously approved modifications are incorporated unless it is determined that the relationship between this change and any of those other previously approved modifications, including changes in type design, will introduce no adverse effect upon the airworthiness of that aircraft. (Continued)

Date of application : February 19, 2005

Date of issuance : May 31, 2005 Date reissued :

( Signature) Manager, Airframe Branch Los Angeles Aircraft Certification Office

(Title)

Number SR01785LA

The provisions of the Supplemental Type Certificate are applicable only to those aircraft which are listed on the attached FAA Approved Model List of Eurocopter France AS350 Series and AS355 Series Helicopter models.

This Airfilm Single Pole Utility Bracket Installation is approved for a maximum weight of not more than 150 pounds a frontal area of 2.5 square feet, a diameter of 15.5 inches, a ground clearance of 6 inches and can only be installed on those helicopters equipped with the high skid gear..

A copy of this Certificate and FAA Approved Model List (AML) No. SR01785LA, dated May 31, 2005, or later FAA Approved revision, must be maintained as part of the permanent records for the modified aircraft.

If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

- END -

ADs that name this STC · 0

An AD can apply because an STC is installed, or mention one in its text.

No AD in this release names this STC

Approved models · 14

MakeModelData sheet
Airbus HelicoptersAS-350BH9EU
Airbus HelicoptersAS-350B1H9EU
Airbus HelicoptersAS-350B2H9EU
Airbus HelicoptersAS-350B3H9EU
Airbus HelicoptersAS-350BAH9EU
Airbus HelicoptersAS-350CH9EU
Airbus HelicoptersAS-350DH9EU
Airbus HelicoptersAS-350D1H9EU
Airbus HelicoptersAS355EH11EU
Airbus HelicoptersAS355FH11EU
Airbus HelicoptersAS355F1H11EU
Airbus HelicoptersAS355F2H11EU
Airbus HelicoptersAS355NH11EU
Airbus HelicoptersAS355NPH11EU

Every issue · 3

DRS keeps each issue of an STC as its own record, with its own certificate and attachments.

DateStatusFiles
June 22, 2018Reissued, currentCertificateApproved model list
March 20, 2018Amended, earlier issueCertificateApproved model list
May 31, 2005Issued, earlier issueCertificate