STC SR01892NY

Part 27 of the Federal Aviation Regulations.

1. Installation of an improved Heating System in accordance with Eurocopter Canada Ltd Installation Procedure IP-ECL-104, Rev. 4, Transport Canada approved August 3, 2004 or later Transport Canada approved revisions.

2. Configuration must be in accordance with Eurocopter Canada Ltd. Master Drawing List MDL 02-014, Issue F, Transport Canada approved August 3, 2004 or later Transport Canada approved revisions.

1. The Rotorcraft must be maintained in accordance with Eurocopter Canada Ltd. Instructions for Continued Airworthiness document No. ICA-ECL-117, Revision 3, Transport Canada accepted May 30, 2006 or later Transport Canada accepted revisions.

2. Operation must be in accordance with Eurocopter Canada Ltd. Flight Manual Supplement No. FMS-ECL-102, Revsion 2, Transport Canada approved on November 26, 2004 or later Transport Canada approved revisions.

3. TURBOMECA Fuel Control Unit Tf39 must be installed in accordance with Turbomeca SB 319 73 4039 “Incorporation of Modification Tf39” prior to installation of this STC

4. Eurocopter Service Bulletin SB 21-008 “Heating System for Very Cold Weather” must be incorporated prior to installation of this STC.

Eurocopter Canada Ltd.

1100 Gilmore Road PO Box 250 Fort Erie, Ontario Canada L2A 5M9 R0001RD Make : Eurocopter Model : EC120B Date of application : October 14, 2003

Date of issuance : May 5, 2004 Date reissued : December 28, 2006

Date amended : June 22, 2006

( Signature) Anthony Socias Manager New York Aircraft Certification Office

( Title)

Number SR01892NY Date of Reissue: December 28, 2006

5. The following placard must be installed adjacent to the floor T-Handle in clear view of the pilot

CABIN FLOOR HEAT

PULL TO OPEN

6. The installer must determine whether this design change is compatible with previously approved modifications.

7. If the holder agrees to permit another pe rson to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

….END…