What it approves
: Installation of the Mechanical Specialties Scupper Assembly, Part Number 300-101, in accordance with Installation Instructions, document # INST 300-101-100, Revision A, dated April 6, 2009, or later FAA approved revision. Manufactured in accordance with Master Document List 300-101-MDL, Revision A, dated April 9, 2009, or later FAA approved revision. Maintained in accordance with Instructions for Continued Airworthiness, document # 300-101-ICAW, Revision A, dated April 09, 2009, or later FAA approved revision.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Number SR01991SE
This certificate, issued to: Mechanical Specialties, LLC 1000 85th Ave. SE Olympia, WA 98501
Part 27 of the Federal Aviation Regulations.
Original ProductType Certificate Number: H2SW Make: Bell Helicopter Textron Canada Limited Model: 206A, 206B
Description of the Type Design Change: Installation of the Mechanical Specialties Scupper Assembly, Part Number 300-101, in accordance with Installation Instructions, document # INST 300-101-100, Revision A, dated April 6, 2009, or later FAA approved revision. Manufactured in accordance with Master Document List 300-101- MDL, Revision A, dated April 9, 2009, or later FAA approved revision. Maintained in accordance with Instructions for Continued Airworthiness, document # 300-101-ICAW, Revision A, dated April 09, 2009, or later FAA approved revision.
Limitations and Conditions: Approval of this change in type design applies to only those rotorcraft listed above. This approval should not be extended to helicopters of these models on which other previously approved modifications are incorporated unless it is determined by the installer that the relationship between this change and any of those other previously approved modifications, including changes in type design, will introduce no adverse effect upon the airworthiness of that helicopter. Bell model 206A & 206B rotorcraft modified in accordance with this STC must be Operated in accordance with a copy of the FAA approved Basic Rotorcraft Flight Manual. A copy of this Certificate and the Instructions for Continued Airworthiness must be maintained as part of the permanent record for the modified rotorcraft.
If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
Date of application: January 23, 2009 Date reissued:
Date of issuance: September 27, 2011 Date amended:
(Signature) Kenneth J. Fairhurst Acting Manager, Seattle Aircraft Certification Office (Title)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.