STC SR02056NY

Supplemental type certificate · Aero-Dyne Repair Services Ltd.

Holder
Aero-Dyne Repair Services Ltd. · Canada
Status
Current · Issued
Status date
February 9, 2005
Applied
July 14, 2004
Product
Aircraft · Rotorcraft
Certification basis
Part 21, Part 27
Data sheet
TCDSH2SW

From FAA DRS, with our copy of the certificate PDF. DRS record last changed December 6, 2025.

What it approves

Installation of Helicopter Performance Monitoring System is to be done in accordance with Aero-Dyne Repair Services Engineering Order (EO) EO332101, Revision 1, dated July 25, 2003, or later Transport Canada approved revision. Audio option is to be installed in accordance with Aero-Dyne Repair Services Engineering Order (EO) EO332102, dated April 2, 2003, or later Transport Canada approved revisions.

What the certificate says

From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.

PO Box 3966 Olds, Alberta Canada T4H 1P7

Part 27 of the Federal Aviation Regulations.

Original Product -- Type Certificate Number: H2SW Make: BELL

206B, 206L, 206L-1, 206L-3, 206L-4 Model:

Installation of Helicopter Performance Monitoring System is to be done in accordance with Aero-Dyne Repair Services Engineering Order (EO) EO332101, Revision 1, dated July 25, 2003, or later Transport Canada approved revision. Audio option is to be installed in accordance with Aero-Dyne Repair Services Engineering Order (EO) EO332102, dated April 2, 2003, or later Transport Canada approved revisions.

1. Aero-Dyne Repair Services Rotorcraft Flight Manual Supplement No. FMS332101, Revision 1, dated July 24, 2003, or later Transport Canada approved revision, is required with this modification.

2. Maintenance Manual Supplement MMS332101, Revision 1, dated April 2, 2003, or later Transport Canada accepted revision, is required as Instructions for Continued Airworthiness with this modification.

3. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

4. Compatibility of this design change with previously approved modifications must be determined by the installer.

Date of application: July 14, 2004

Date of issuance: February 09, 2005 Date reissued:

( Signature) Vito A. Pulera Manager New York Aircraft Certification Office

(Title)

ADs that name this STC · 0

An AD can apply because an STC is installed, or mention one in its text.

No AD in this release names this STC

Approved models · 5

MakeModelData sheet
Bell Helicopter Textron (Canada)206BH2SW
Bell Helicopter Textron (Canada)206LH2SW
Bell Helicopter Textron (Canada)206L-1H2SW
Bell Helicopter Textron (Canada)206L-3H2SW
Bell Helicopter Textron (Canada)206L-4H2SW