STC SR02062SE

Supplemental type certificate · Aerometals

Holder
Aerometals · United States
Status
Current · Reissued
Status date
February 8, 2011
Applied
May 21, 2009
Product
Aircraft · Rotorcraft
Certification basis
Part 21
Data sheet
TCDSH3WE

From FAA DRS, with our copy of the certificate PDF. DRS record last changed December 6, 2025.

What it approves

Fabrication of a replacement Aerometals Heater Control Valve Assembly in accordance with Aerometals Master Drawing List No. Aero-MDL-007, Revision A, dated February 17, 2010, or later FAA-approved revision; and installation of this assembly in accordance with Aerometals Installation Instructions No. Aero-Inst-008, Revision NC, dated March 27, 2009, or later FAA-accepted revision.

What the certificate saysOCR

This is OCR from the scanned FAA certificate. OCR can misread letters and numbers.

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number SRO2062SE This certificate issued to: Aerometals 3920 Sandstone Dr.

El Dorado Hills, CA 95762 Part * of the * Regulations.

* Certification basis set forth in Type Certification Data Sheet H3WE.

Original Product - Type Certificate Number: H3WE Make: MD Helicopter, Inc.

Model: 369HS/HM/HE, 369D/E/FF, 500N, 600N Description of Type Design Change: Fabrication of a replacement Aerometals Heater Control Valve Assembly in accordance with Aerometals Master Drawing List No. Aero-MDL-007, Revision A, dated February 17, 2010, or later FAA-approved revision; and installation of this assembly in accordance with Aerometals Installation Instructions No. Aero-Inst-008, Revision NC, dated March 27, 2009, or later FAA-accepted revision.

Limitations and Conditions: Approval of this change in type design applies to the rotorcraft listed above only.

This approval should not be extended to other rotorcraft of this model on which other previously approved modifications are incorporated unless the installer determines that the relationship between this change and any other previously approved modifications, including changes in type design, will introduce no adverse effect upon the airworthiness of that rotorcraft.

A copy of this certificate must be maintained as part of the permanent records for the modified rotorcraft.

If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

Date of Application: May 21, 2009 Date Reissued: February 8, 2011 Date of Issuance: April 28, 2010 Date Amended:

FEDERAL AVIATION TOMINIST RATION For Acting Manager, Seattle Aircraft Certification Office (Signature) (Title)

ADs that name this STC · 0

An AD can apply because an STC is installed, or mention one in its text.

No AD in this release names this STC

Approved models · 8

MakeModelData sheet
MD Helicopter Inc.369DH3WE
MD Helicopter Inc.369EH3WE
MD Helicopter Inc.369FFH3WE
MD Helicopter Inc.369HEH3WE
MD Helicopter Inc.369HMH3WE
MD Helicopter Inc.369HSH3WE
MD Helicopter Inc.500NH3WE
MD Helicopter Inc.600NH3WE

Every issue · 3

DRS keeps each issue of an STC as its own record, with its own certificate and attachments.

DateStatusFiles
February 8, 2011Reissued, currentCertificate
April 28, 2010Issued, earlier issueCertificate
February 8, 2010Reissued, earlier issueCertificate