What it approves
Installation of the MECHANICAL SPECIALTIES, Model # UH606 in accordance with document # UH606-100-ICAW paragraph 6, Revision A, dated November 09, 2008, or later FAA approved revision. Manufactured in accordance with Master Document list MDL-205-60-111, Revision A, dated April 9, 2009, or later FAA approved revision. Maintained in accordance with document # UH606-100-ICAW Revision A, dated November 09, 2008, or later FAA approved revision.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Number SR02126SE
This certificate, issued to Mechanical Specialties, LLC 1000 85th Ave. SE Olympia, WA 98501 Part * of the * Regulations.
Original ProductType Certificate Number: *See attached Approved Model List (AML) Make: SR02126SE for list of approved rotorcraft Model: models and applicable airworthiness regulations
Description of the Type Design Change: Installation of Mechanical Specialties, LLC Cargo Hook and Suspension Assembly System, Model Number UH606, in accordance with Mechanical Specialties, LLC Document UH606-100-ICAW, Paragraph 6, Revision A, dated November 9, 2008, or later Federal Aviation Administration (FAA) approved revision. Manufactured in accordance with Mechanical Specialties, LLC Master Document List MDL-205-60-111, Revision B, dated April 12, 2012, or later FAA-approved revision. Maintained in accordance with Mechanical Specialties, LLC Document UH606-100-ICAW, Revision A, dated November 9, 2008, or later FAA-approved revision.
Limitations and Conditions: Approval of this change in type design applies to only those rotorcraft listed above. This approval should not be extended to rotorcraft of these models on which other previously approved modifications are incorporated unless it is determined by the installer that the relationship between this change and any of those other previously approved modifications, including changes in type design, will introduce no adverse effect upon the airworthiness of that rotorcraft. Bell model rotorcraft modified in accordance with this supplemental type certificate must be operated in accordance with a copy of the FAA-approved Mechanical Specialties, LLC Rotorcraft Flight Manual Supplement (RFMS) MSI-FMS-UH606-01, dated March 30, 2012, or later FAA-approved revision. A copy of this certificate, AML SR02126SE, the FAA-approved RFMS, and the Instructions for Continued Airworthiness must be maintained as part of the permanent record for the modified rotorcraft.
If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
Date of application: March 31, 2009 Date reissued:
Date of issuance: March 28, 2011 Date amended: April 19, 2012
(Signature)
Acting Manager, Seattle Aircraft Certification Office (Title)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 5
Every issue · 2
DRS keeps each issue of an STC as its own record, with its own certificate and attachments.
| Date | Status | Files |
|---|---|---|
| April 19, 2012 | Amended, current | CertificateApproved model list |
| March 28, 2011 | Issued, earlier issue | Certificate |