STC SR02292AK

This certificate issued to Vector Aerospace Helicopter Services USA Inc.

1873 Shell Simmons Drive, Suite 110 Juneau, AK 99801

Part 27 of the Federal Aviation Regulations

Original Product — Type Certificate Number: H2SW Make: Bell Model: 206, 206A, 206A-1, 206B, 206B-1, 206L, 206L-1, 206L-3, 206L-4

Description of Type Design Change: Installation of a SAGEM Avionics Integrated Cockpit Display System (ICDS) with a Crossbow Attitude and Heading Reference System (AHRS) in accordance with Vector Aerospace Helicopter Services USA Inc. “Master Drawing List”, HP 206-34-33-101, revision G, dated February 28, 2011, or later FAA approved revision.

1) The installer must determine whether this design change is compatible with previously approved modifications.

2) If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

3) Interfacing this modification with an autopilot or any type of automated flight control system will require additional FAA engineering approval.

4) A rotorcraft modified in accordance with this Supplemental Type Certificate is limited to VFR flight only.

(Limitations and Conditions continued on page 3 of 3)

Date of application: February 5, 2007 Date reissued: June 30, 2008 Date of issuance: July 12, 2007 Date amended: June 30, 2008; April 4, 2011

( Signature) August Asay Manager, Anchorage Aircraft Certification Office

( Title)

FAA FORM 8110-2-1(10-69) PAGE 3 of 3 PAGES

Number SR02292AK

5) Instructions for Continued Airworthiness, Vector Aerospace Helicopter Services USA Inc., document number HP 206-34-33-251, revision E, dated February 17, 2011 or later FAA accepted revisions is a required part of this modification.

6) Rotorcraft Flight Manual Supplement, document number HP 206-34-33-302, rev F, dated April 4, 2011 or later FAA approved revision is required to be carried on the rotorcraft as part of this modification.

Certification Basis:

Based on Title 14 Code of Federal Regulations Part 27, as amended by Amendments 29-0 through 29-25.

---------------------------------------------------------END---------------------------------------------------------