STC SR02295LA

FAA Form 8110-2 (5/14) Page 1 of

Part of the

Signature

Title Garmin International, Inc.

1200 East 151st Street Olathe, KS 66062 3 SR02295LA Federal Aviation Regulations 27 Installation of the Garmin G500H Flight Display System in accordance with Garmin Master Drawing List, 005-C0577-00 Rev. 7, dated 5-Jan-2017; or later FAA-approved revision. The Master Drawing List establishes the approved configuration for each model on the AML. The FAA-approved Rotorcraft Flight Manual Supplements and Instructions for Continued Airworthiness (ICA) applicable to each rotorcraft are identified in the Master Drawing List by configuration.

See Approved Model List (AML) SR02295LA for approved rotorcraft models and applicable airworthiness regulations.

(1) This approval should not be incorporated in any rotorcraft unless it is determined that the interrelationship between this installation and any previous approved configuration will not introduce any adverse effect upon the airworthiness of the rotorcraft.

(2) Rotorcraft that are modified per this STC are limited to VFR flight and must be placarded "APPROVED FOR DAY/NIGHT VFR".

(See Continuation Sheet 3) November 14, 2014, February, 21, 2017 January 6, 2017; February 11, 2020 September 4, 2009 May 21, 2010 Multiple - AML STC JR Brownell ODA STC Unit Administrator ODA-240087-CE

FAA Form 8110-2 (5/14) Page 2 of

To (Name and address of transferee)

From (Name and address of grantor)

This certificat e may be transferred or made available to third persons by licensing agreements in accordance with 14 CFR 21.47.

FAA Form 8110-2 (5/14) Page 3 of

3 SR02295LA Amended: January 6, 2017; February 11, 2020

(3) A copy of this certificate, the approved RFMS, and the approved ICA must be maintained as a part of the permanent records for the modified rotorcraft.

(4) If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person evidence of that permission.

(5) Previous or concurrent installation of the G500H Flight Display System in accordance with STC SR09575RC (AS 350 B2, AS 350 B3) or SR09576RC (EC 130 B4) is required.

Certification Basis:

Based on 14 CFR §§ 21.115 and 21.101, and the FAA policy for significant changes in FAA Order 8110.48, the certification basis for this change is as follows:

a. The certification basis for parts not changed or not affected by this change is shown on the attached AML.

b. The certification basis for parts changed or affected by this change for all models on the AML are listed below.

Section

27.301 (a)(b)(c)

27.303

27.305 (a)

27.307 (a)

27.321 (a)(b)

27.337 (a)(b)

27.561 (a)(b)(3)(c)

27.601(a)(b)

27.603 (a)(b)(c)

27.605 (a)

27.607 (a)

27.609 (a)(b)

27.610 (a)(b)(c)(d)

27.611 (a)(b)

27.613 (a)(b)(c)(d)(e)

27.771 (a) Amdt.

Original Original Original 27-26 27-11 27-26 27-32* Original 27-16 27-16 27-4 Original 27-46 Original 27-26 Original

Section

27.773 (a)(b)

27.777 (a)(b)

27.853 (a)

27.863 (a)(b)

27.1301 (a)(b)(c)(d)

27.1303 (a)(b)(c)

27.1309 (a)(c)

27.1316 (a)

27.1317 (a)(b)(c)

27.1321 (a)(c)(d)

27.1322 (a)(b)(c)(d)

27.1323 (a)(c)

27.1325 (a)

27.1327 (a)(b)

27.1351 (a)

27.1357 (a)(b)(c)(d) Amdt.

Original Original 27-37 27-16 Original Original 27-46 27-46 27-42 27-13 27-11 27-13 27-13 27-13 27-13 27-13 Section

27.1365 (a)(b)(c)

27.1367 (a)(b)(c)

27.1381 (a)(b)

27.1501 (a)(b)

27.1523 (a)(b)(c)

27.1525

27.1529

27.1541 (a)(b)

27.1543 (b)

27.1545 (a)(b)**

27.1555 (a)

27.1559

27.1581 (a)(b)(d)

27.1583 (d)(e)

27.1585 (a) Amdt.

27-35 Original Original 27-14 Original 27-21 27-18 Original Original 27-16 27-21 27-21 27-14 27-16 27-21 *For the Robinson model rotorcraft on the AML, 27.561 (a)(b)(3)(c) remains at Amdt. Original **27.1545 (b)(2) is not applicable to the following Bell CAR 6 model rotorcraft: 206A, 206A-1, 206B, 206L, 206L-1, 206L-3, and 206L-4

Additional Robinson Model Specific Regulations Section Amdt. Section Amdt. Section Amdt.

27.1 (a)(b) 27-37 27.305 (b) Original 27.785 (a)(b)(1)(e) 27-21

27.2 (a)(2) 27-37

----END----