What it approves
Internal structural provision
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Number SR02310SE
This certificate, issued to Brim Aviation 455 Dead Indian Memorial Rd.
Ashland, OR 97520
Part 27 of the Federal Aviation Regulations.
Original ProductType Certificate Number: H3WE Make: MDHI Model: 600N
Description of the Type Design Change: Internal structural provision in accordance with Master Drawing List CC-BARA-MDL, Revision B, dated May 17, 2012, or later Federal Aviation Administration (FAA) approved revision.
Limitations and Conditions: Approval of this change in type design applies to the above rotorcraft only. This approval should not be extended to other rotorcraft of this model unless the installer determines that the relationship between this change and any other previously incorporated approved modifications will introduce no adverse effect upon the airworthiness of that rotorcraft.
This modification must be operated in accordance with Rotorcraft Flight Manual Supplement (RFMS) BA600-RFM-001, Revision N/C, signed October 23, 2013, or later FAA-approved revision; and installed and maintained in accordance with Instructions for Continued Airworthiness (ICA) BA600-RA1, Revision 3, dated July 26, 2011, or later FAA-approved revision.
A copy of this certificate, the RFMS, and the ICA must be maintained as part of the permanent records for the modified aircraft. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
Date of application: February 17, 2010 Date reissued:
Date of issuance: May 23, 2014 Date amended:
(Signature)
Manager, Seattle Aircraft Certification Office (Title)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| MD Helicopters Inc. | 600N | H3WE |