What it approves
Permits operation with removal of pilot left side and both rear doors removed or with pilot left side and rear left side door removed
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
This Certificate issued to
Summit Helicopter 12653 Osborne Street PMB 35 Pacoima, California 91331 CAR 6 of the Federal Aviation Regulations Original Product Type Certificate Number :
H3WE
MD Helicopters Inc. (MDHI)
369D, 369E, 369F, 369FF, 500N Description of Type Design Change: Permits operation with removal of pilot left side and both rear doors removed or with pilot left side and rear left side door removed. Removals performed per instructions found in MD Helicopters Inc. Maintenance Manual CSP-HMI-2.
See Continuation Sheet on Page 3
Date of application : November 12, 2012
Date of issuance : June 16,2014
(Signature) Manager, Airframe Branch Los Angeles Aircraft Certification Office (Title)
NOTE:
DO NOT DELETE THIS PAGE.
DO NOT ADD ANY DATA TO THIS PAGE.
THIS PAGE IS FOR PAGE NUMBERING PURPOSES, PLEASE DISCARD PRINTED COPY.
Number SR02463LA
Limitations and Conditions: (Continued from Page 1)
FAA Approved Rotorcraft Flight Manual Supplement No. 121442 dated April 24, 2014, or later FAA Approved revisions to basic MD Helicopters Inc. 39D, 369E, 369F, 369FF, 500N Flight Manual is required as a part of this helicopter modification.
Summit Helicopter Instructions for Continued Airworthiness, Document ICA121442, Revision IR, accepted May 1, 2014.
If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
- END -
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.