STC SR02567NY

Part 29 of the Federal Aviation regulations.

Original Product -- Type Certificate N umber:

1. S92A Airliner - High Profile (HP) version; Installation Procedure for Provision Kit p/n 509429-03 for an Internal Auxiliary Fuel System (IAFS), Document No. 080S194, edition 13 dated July 02, 2013 or later approved EASA revision.

2. S92A Search and Rescue (SAR) - HP version; Installation Procedure for Provision Kit p/n 509429-03 for an IAFS, Document No. 080S148, edition 19 dated July 02, 2013 or later approved EASA revision.

3. Aerazur Provisional Kit flowchart, document No.509429-02, edition 12 dated May 26, 2008 or later approved EASA revisions.

4. Aerazur Provisional Kit flowchart, document No.509429-03, edition 13 dated July 05, 2013or later approved EASA revisions.

5. Instructions for Continued Airworthiness, “IAFS – Provision Kit – Instructions for Continued Airworthiness Supplement”, Document No. S92 IAFS-ICAS-001, Revision 2 dated April 17, 2012 or later accepted EASA revisions is required.

6. Aircraft Maintenance Manual Supplement for Auxiliary Fuel System – Provision Kit of Sikorsky Helicopter Model S-92A, Document No. S92 IAFS-AMMS-001, Revision 7 dated July 08, 2013 or later accepted EASA revisions is required.

1. The FAA has not certified the IAFS for which these provisions are intended. You must get additional FAA approval to install the IAFS. The FAA must evaluate the installation to ensure it complies with the applicable airworthiness standards.

(See Limitations and Conditions continued on Sheet 3 of 3)

Aerazur-Zodiac Group 4, rue Lesage Maille – BP 22 76320 Caudebec Les Elbeuf France

R00024BO M ake: Sikorsky M odel: S-92A Date of application: February 29, 2008

Date of issuance: September 30, 2008

Date amended: May 24, 2011; November 21, 2012;

November 22, 2013

B y direction of the A dministrator

(Signature) Gaetano Sciortino Manager New York Aircraft Certification Office

(Title)

FAA Form 8110-2-1(10-69) Page 3 of 3

N umber SR02567NY Date Amended: November 22, 2013 Limitations and Conditions (cont’d):

2. The installer must determine whether this design change is compatible with previously approved modifications.

3. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other pers on written evidence of that permission.

---End---