STC SR02634NY

This certificate issued to

Part * of the * Regulations.

The installation of WESCAM Low Profile Bracket Installation (HIGH) and 24”, 16” or 12” WESCAM Sensor Installation-Structural Provisions Only, to be done in accordance with DECA Aviation Engineering Order No. 9703485, Revision 6 dated August 13, 2008, Transport Canada approved on August 25, 2008 or later Transport Canada approved revision.

1. Operation must be in accordance with DECA Aviation Flight Manual Supplement No. 4368-01, Revision 4, Transport Canada approved August 25, 2008, or later Transport Canada approved revision.

2. Maintenance must be in accordance with DECA Aviation Instructions for Continued Airworthiness ICA 4368, Revision 1, Transport Canada accepted August 25, 2008, or later Transport Canada accepted revision.

3. Placard per Section 1.8 of Flight Manaul Supplement No. 4368-01 must be installed in clear view of the pilot.

4. The eligible WESCAM sensor models are: 24” sensor model No. 104, 16” sensor model numbers: 116-DB-720, 116-DB-750, 116-SS-750, 116-8009-01(DB), 116-8010-01(16DS-W), 116-8014-01(1671-BAEA), M16DSM and 12” sensor model No.

M12DS200.

5. The Installer must determine whether this design change is compatible with previously approved modifications.

6. If the holder agrees to permit another person to use the certificate to alter a product, the holder must give the other person written evidence of that permission.

L-3 WESCAM Inc.

649 North Service Rd. West Burlington, ON Canada L7H 5B9 * See attached FAA Approved Model List (AML) No.

SR02634NY for the list of approved aircraft models and applicable airworthiness regulations Make: * Model: * Date of application: September 8, 2008

Date of issuance: December 05, 2008 Date reissued:

( Signature) Anthony Socias Manager New York Aircraft Certification Office

( Title)