STC SR02650SE

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate This certificate issued to:

SR02650SE Timberline Aerospace, LLC.

1302 Ontario St.

Sandpoint, ID 83864 .

*See attached Federal Aviation Administration (FAA) Approved Model List (AML) SR02650SE for approved aircraft models and applicable airworthiness regulations Model:Description of Type Design Change:

Installation of Station 34.5 Beam Modification in accordance with Installation Instructions TA-34.5-INST-1, Revision 0, dated July 10, 2019, or later FAA approved revision. Manufactured in accordance with Master Drawing List as listed on AML SR02650SE dated September XX, 2021, or later FAA approved revision. Maintained in accordance with the Instructions for Continued Airworthiness (ICA) as listed on AML SR02650SE dated October 26, 2021, or later FAA approved revision.

Approval of this change in type design applies to the rotorcraft listed on AML SR02650SE only. This approval should not be extended to other rotorcraft of these models on which other previously approved modifications are incorporated unless it is determined by the installer that the (see continuation sheet) (See Continuation Sheet Page 3 of 3 Pages)

May 3, 2019 July 19, 2019 October 26, 2021 By Direction of the Administrator Signature:

For Acting Manager, Seattle ACO Branch

FAA Form 8110-2 (11/20) SUPERSEDES PREVIOUS EDITION Page 1 of ___ 3

SR02650SE

FAA Form 8110-2 (11/20) SUPERSEDES PREVIOUS EDITION Page 2 of ___ 3

SR02650SE Limitations and Conditions (continued):

relationship between this change and other previously approved modifications will introduce no adverse effect upon the airworthiness of that Rotorcraft.

A copy of this certificate, AML SR02650SE, and ICA, must be maintained as part of the permanent records for the modified aircraft. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

End

FAA Form 8110-2 (11/20) SUPERSEDES PREVIOUS EDITION Page ___ of 3 ___ 3