STC SR02651LA

Supplemental type certificate · Onboard Systems International

Holder
Onboard Systems International · United States
Status
Current · Reissued
Status date
October 7, 2021
Applied
March 1, 2016
Product
Aircraft · Rotorcraft
Certification basis
Part 21, Part 27
Data sheet
TCDSH2SW

From FAA DRS, with our copy of the certificate PDF. DRS record last changed December 5, 2025.

What it approves

Installation of a secondary external load hard point

What the certificate says

From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.

FAA Form 8110-2 (11/20) SUPERSEDES PREVIOUS EDITION Page 1 of ___ United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number:

(See Continuation Sheet Page 3 of 3 Pages) SR02651LA Onboard Systems International, LLC 13915 NW 3rd Court Vancouver, WA 98685 Part 27* the Federal Aviation Regulations H2SW Bell 206L, 206L-1, 206L-2, 206L-3, 206L-4, 407 Installation of a secondary external load hard point in accordance with FAA approved Aerocraft Inc, Master Data List, ARC-407-MDL, Revision “NC” dated February 22, 2017, and FAA approved Aerocraft+ Rotorcraft Flight Manual Supplement ARC-407HPRFMS revision “A” dated June 20, 2017, or later FAA Approved Revisions.

The installation should not be incorporated in any aircraft unless it is determined that the interrelationship between this installation and any previously approved configuration will not introduce any adverse effect upon the airworthiness of the aircraft. The approval of this modification applies to the above noted airplane model series only. This approval is for structural provisions for a 650 pound external load and other aspects of the external loads system have not been certified. Additional FAA approval is required for external loads operations which must be evaluated to assure satisfactory compliance with the applicable airworthiness standards. A copy of this STC must be included in the permanent records of the modified aircraft.

If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

March 1, 2016 June 22, 2017 September 30, 2017; October 7, 2021 For Acting Manager, Seattle ACO Branch 3 *Certification basis is set forth in continuation sheet

FAA Form 8110-2 (11/20) SUPERSEDES PREVIOUS EDITION Page 2 of ___ United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number:

SR02651LA 3

FAA Form 8110-2 (11/20) SUPERSEDES PREVIOUS EDITION Page ___ of ___ United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number:

End SR02651LA Certification Basis:

As set forth in Type Certificate Data Sheet H2SW except the following Federal Aviation Regulations are found in compliance with the shown later amendments:

ADs that name this STC · 0

An AD can apply because an STC is installed, or mention one in its text.

No AD in this release names this STC

Approved models · 5

MakeModelData sheet
Bell Helicopter Textron Canada Limited206LH2SW
Bell Helicopter Textron Canada Limited206L-1H2SW
Bell Helicopter Textron Canada Limited206L-3H2SW
Bell Helicopter Textron Canada Limited206L-4H2SW
Bell Helicopter Textron Canada Limited407H2SW

Every issue · 3

DRS keeps each issue of an STC as its own record, with its own certificate and attachments.

DateStatusFiles
October 7, 2021Reissued, currentCertificate
September 30, 2017Reissued, earlier issueCertificate
June 22, 2017Issued, earlier issueCertificate