What it approves
Installation of an Air Probe to be installed
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Part 06 of the Civil Air Regulations.
The installation of an Air Probe to be installed in accordance with AERO Design Ltd. Document Control List DCL810, Revision 01, dated December 18, 2008, or later Transport Canada approved revision.
1. Operation to be in accordance with airspeed limitations specified in AERO Design Ltd. Rotorcraft Flight Manual Supplement FMS 810.91, Revision 0, dated December 18, 2008, or later Transport Canada approved revision.
2. Maintenance must be in accordance with AERO Design Ltd. Maintenance Manual Supplement No. MMS 810.91, Revision 01, dated December 11, 2008, or later Transport Canada accepted revision.
3. The Installer must determine whether this design change is compatible with previously approved modifications.
4. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission
LiDar Services International Inc.
250, 3115 – 12 Street NE Calgary, Alberta Canada T2E 7J2 H2SW Bell 206B Date of application: March 03, 2009
Date of issuance: June 17, 2009
( Signature) Anthony Socias Manager New York Aircraft Certification Office
( Title)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| Bell Helicopter Textron (Canada) | 206B | H2SW |