STC SR02712NY

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate The STC’s supporting documentation (drawings, instructions, specifications, flight manual supplements, etc.) is the property oft h eS T C holder.

FAA Form 8110-2 (5/14) Page 1 of This certificate issued to:

Part of the Original Product – Type Certificate Number: Make:

By Direction of the Administrator Signature Title 3 SR02712NY Honeywell International Inc.

21111 N 19th Ave Phoenix Arizona 85027 Federal Aviation Regulations.27 The installation of a Sky Connect Satcom/Tracking System must be performed in accordance with Avionics Design Services Ltd. Master Drawing List No. MDL08055, Rev. E, Issue 1, dated April 20, 2009 or later revision.

1) Maintenance must be in accordance with the following documents:

a. Icarus Instruments Instructions for Continued Airworthiness Documents No. DOC A2006-031-1, Rev. B, dated August 12, 2006 or later FAA accepted revision.

b. Document Change Notice No. DCN08055-1, Issue 3, dated April 20, 2009, or later FAA accepted revision.

(See continuation sheet) Richard B. Sleigh ODA Administrator, ODA-602216-NM Bell Helicopter Textron Canada 407 08/12/09; 02/09/11; 08/28/14; 04/01/20April 07, 2009 July 07, 2009 H2SW

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate The STC’s supporting documentation (drawings, instructions, specifications, flight manual supplements, etc.) is the property oft h eS T C holder.

FAA Form 8110-2 (5/14) Page 2 of

To (Name and address of transferee) From (Name and address of grantor) Extent of Authority (if licensing agreement):

The STC’s supporting documentation (drawings, instructions, specifications, flight manual supplements, etc.) is the property oft h eS T C holder.

FAA Form 8110-2 (5/14) Page 3 of

2) Operation must be in accordance with Avionics Design Services Ltd. Rotorcraft Flight Manual Supplement No. FMS08055-1, Rev. N/C, approved April 1, 2009, or later FAA approved revision.

3) The installer must determine whether this design change is compatible with previously approved modifications.

4) If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

------------------------------------------------------------------------------------END------------------------------------------------------------------------------------ SR02712NY