STC SR02726NY

Part 6 / 27 of the Civil Air / Federal Aviation Regulations.

Make: * Bell

Model: * 206, 206A, 206A-1, 206B, 206B-1, 206L, 206L-1, 206L-3, 206L-4, 407

Description of Type Design Change Installation of Interior Trim Panels in accordance with Dart Aerospace Ltd. Installation Instructions IIN-D407-781 Revision A, dated October 22, 2008, Transport Canada approved December 22, 2008, or later Transport Canada approved revision.

1. Dart Aerospace Ltd. Instructions for Continued Airworthiness ICA-D407-781 Revision 0, dated November 20, 2008, Transport Canada accepted December 22, 2008, or later Transport Canada accepted revision, is required with this installation.

2. The Installer must determine whether this design change is compatible with previously approved modifications.

3. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission

Dart Aerospace Ltd.

1270 Aberdeen Street Hawkesbury, Ontario K6A 1K7 Canada H2SW Date of application: February 12, 2009

Date of issuance August 18, 2009 Date reissued:

( Signature) Anthony Socias Manager New York Aircraft Certification Office

( Title)

FAA Form 8110-2-1(10-69) Page 2 of 2

Number SR02726NY

Certification Basis:

Based on 14 CFR § 21.115 and § 21.101, and the FAA policy for changes that are not significant in FAA Order 8110.48, the certification basis for this modification is as follows:

The existing type certification basis for Bell 206, 206A, 206A-1, 206B, 206B-1, 206L, 206L-1, 206L-3, 206L-4, and 407 as shown on FAA Type Certificate Data Sheet H2SW with the following exceptions:

§27.1 Amendment 27-37 §27.2 Amendment 27-37 §27.25 Amendment 27-44 §27.561(b) (3) Amendment 27-32 §27.625 Amendment 27-35 §27.853(a) Amendment 27-37

………………………..END…………………………….