STC SR02730NY

FAA Form 8110-2 (5/14) Page 1 of

Part of the

Signature

Title SR02730NY Dart Aerospace Ltd.

1270 Aberdeen Street Hawkesbury, Ontario Canada K6A 1K7 Civil Air / Federal Aviation Regulations.

1. Configuration A – Quick Release Mounting Provisions:

Installation of Quick Release Mounting Provisions in accordance with Aero Design Ltd. Document Control List, DCL751-4, Revision 0, dated January 13, 2015, TCCA approved February 6, 2015, or later TCCA approved revisions.

2. Configuration B – Quick Release Cargo Basket Installation: (Standard Basket) Installation of Quick Release Cargo Basket in accordance with Aero Design Ltd. Document Control List, DCL751-1, Revision 2, dated January 13, 2015, TCCA approved February 6, 2015, or later approved revision.

(See Description of Type Design Change continued on Page 3 of 3)

1. Installation of Configuration A or E is a prerequisite for the installation of Configurations B, C and D.

2. Installation of Configuration E is a prerequisite for the installation of Configuration F.

3. Configuration A and E may remain installed on aircraft when Configuration B, C, D or F are removed.

4. Configuration D is not approved for installation on Bell 212, 412EP, or 412CF.

5. Configuration F is not approved for installation on Bell 412, 412EP, or 412CF.

(See Limitations and Conditions continued on Page 3 of 3) Anthony E. Gallo Acting Manager New York ACO Branch * * April 13, 2015; October 18, 2019 November 17, 2015 March 19, 2009 September 11, 2009 IMPORT * See attached FAA Approved Model List (AML) No. SR02730NY for a list of approved models and applicable regulations.

FAA Form 8110-2 (5/14) Page 2 of

To (Name and address of transferee)

From (Name and address of grantor)

3 SR02730NY

FAA Form 8110-2 (5/14) Page 3 of

3 Date Reissued: October 18, 2019

Description of Type Design Change (continued):

3. Configuration C – Quick Release Cabin Step Installation:

Installation of Quick Release Cabin Step in accordance with Aero Design Ltd. Document Control List, DCL800-1, Revision 1, dated January 13, 2015, TCCA approved February 6, 2015, or later approved revision.

4. Configuration D – Quick Release Cargo Basket: (Extra Large Basket) Installation of Quick Release Cargo Basket in accordance with Aero Design Ltd. Document Control List, DCL955-3, Revision 0, dated January 13, 2015, TCCA approved February 6, 2015, or later approved revision.

5. Configuration E – Quick Release Mounting Provisions: (Alternate) Installation of Quick Release Mounting Provisions in accordance with Aero Design Ltd. Document Control List, DCL1006-2, Revision 0, dated January 16, 2015, TCCA approved February 6, 2015, or later approved revision.

6. Configuration F – Quick Release Cargo Basket Installation: (Mega Basket) Installation of Quick Release Cargo Basket in accordance with Aero Design Ltd. Document Control List DCL1006-1, Revision 0, dated January 16, 2015, TCCA approved February 6, 2015, or later approved revision.

7. Cargo Basket Modifications:

Modifications to the Cargo Basket Configuration are eligible in accordance with TCCA approved, Aero Design Ltd. document Control List DCL 704, Revision 10, dated December 18, 2014, or later approved revision.

6. Eligibility limitations of cargo basket modifications are noted on the drawings listed in Aero Design Ltd Document Control List DCL 704, Revision 10, dated December 18, 2014, TCCA approved February 6, 2015, or later TCCA approved revision.

7. Aero Design Ltd. Rotorcraft Flight Manual Supplement FMS751.91, Revision 2, dated December 16, 2014, TCCA approved February 6, 2015, or later TCCA approved revisions is required to all installation configurations.

8. Aero Design Ltd. Instructions for Continued Airworthiness ICA 751.90 Revision 2, dated January 13, 2015, TCCA accepted February 6, 2015, or later TCCA accepted revisions is required with the installation of quick release cargo baskets.

9. Aero Design Ltd. Instructions for Continued Airworthiness ICA800.90 Revision 3, dated January 13, 2005, TCCA accepted February 6, 2015, or later TCCA accepted revisions is required with the installation of quick release steps.

10. The installer must determine whether this design change is compatible with previously approved modifications.

11. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

----------END---------- SR02730NY