STC SR02743NY

FAA Form 8110-2 (8/13) Page 1

Part of the Federal A viation Regulations.

Original Product – Type Certificate Number: MDNH:

MRGHO:

Signature

Title

IMPORT SR02743NY Mecaer Aviation Group S.p.A Via Dell' Artigianato 1 63033 Monteprandone (AP) Italy 29 R00002RD Agusta S.p.A AW139 Interior Configuration Change from Agusta certified basic configuration of 12 seats in passenger cabin to Servizi Elicotteristici Italiani S.p.A VIP 131 P/N 6AB1AD009-001 passengers Cabin Installation.

1. Agusta P/N 4G2520F0311 is a prerequisite for this installation.

2. Rotorcraft Flight Manual Supplement No. 6AB1RFM-1-7 Rev C, dated March 26, 2009, or later EASA approved revision is required with this installation.

(See Continuation Sheet 3) September 29, 2008 April 15, 2014, May 9, 2014 November 18, 2009

Gaetano Sciortino Manager New York Aircraft Certification Office

FAA Form 8110-2 (8/13) Page 2

To (Name and address of transferee) From (Name and address of grantor) Extent of Authority (if licensing agreement):

SR02743NY

FAA Form 8110-2 (8/13) Page 3

SR02743NY Limitations and Conditions (Continued):

3. Instructions for Continued Airworthiness (ICA), Owner's Manual (Installation Manual, Maintenance Manual and Illustrated Parts Breakdown) No. 6AB1WNM-2-14, Rev. C, dated March 26, 2009, or later EASA accepted revisions must be made available to the operator at the time of the installation.

4. The installer must determine whether this design change is compatible with previously approved modifications.

5. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

................................END.....................................