STC SR02770NY

Supplemental type certificate · Dart Aerospace Limited

Holder
Dart Aerospace Limited · Canada
Status
Current · Amended
Status date
August 24, 2020
Applied
September 24, 2009
Product
Aircraft · Rotorcraft
Certification basis
Part 21

From FAA DRS, with our copy of the certificate PDF. DRS record last changed December 6, 2025.

What it approves

The installation of Quick Release Maintenance Step, Maintenance Peg Step and Fixed Cabin Step

What the certificate says

From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.

FAA Form 8110-2 (5/14) Page 1 of This certificate issued to:

Part of the Original Product – Type Certificate Number: Make:

By Direction of the Administrator Signature Title Timothy J. Hadsall Acting Manager New York ACO Branch IMPORT SR02770NY Dart Aerospace Ltd.

1270 Aberdeen Street Hawkesbury, Ontario Canada K6A 1K7 * Federal Aviation Regulations.

* See attached FAA Approved Model List (AML) No. SR02770NY for a list of approved models and applicable regulations.

* For Configuration A thru C:

1. The installation of Quick Release Maintenance Step, Maintenance Peg Step, and Fixed Cabin Step to be done in accordance with Aero Design Ltd. Document Control Lists as listed on AML No. SR02770NY.

2. Operation must be in accordance with Aircraft Flight Manual Supplement as listed on AML No. SR02770NY.

3. Instructions for Continued Airworthiness as listed on AML No. SR02770NY are required for this installation.

(See Description of Type Design Change Continued on Page 3 of 3)

1. The installer must determine whether this design change is compatible with previously approved modifications.

2. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

3. Data pertinent to all configurations:

Any combination of Configurations A, and B, with either only C and D may be simultaneously installed.

April 13, 2015, October 18, 2019 * September 24, 2009 January 26, 2010 February 29, 2016, August 24, 2020 3

FAA Form 8110-2 (5/14) Page 2 of

To (Name and address of transferee)

From (Name and address of grantor)

3 SR02770NY

FAA Form 8110-2 (5/14) Page 3 of Date Amended: August 24, 2020

Description of Type Design Change (continued):

For Configuration D:

1. The Cabin Step Installation to be done in accordance with Transport Canada Civil Aviation (TCCA) approved Dart Aerospace Ltd. Installation Instructions IIN-D350-1082, Revision A, dated February 27, 2020, or later TCCA approved revision.

2. Maintenance to be done in accordance with TCCA accepted Dart Aerospace Ltd. Instructions for Continued Airworthiness as listed on AML No. SR02770NY.

3. Definition of Type Design Change in TCCA approved Dart Aerospace Ltd. Master Document List as listed on AML No. SR02770NY.

----------END----------

3 SR02770NY

ADs that name this STC · 0

An AD can apply because an STC is installed, or mention one in its text.

No AD in this release names this STC

Approved models · 12

MakeModelData sheet
Airbus HelicoptersAS-350BH9EU
Airbus HelicoptersAS-350B1H9EU
Airbus HelicoptersAS-350B2H9EU
Airbus HelicoptersAS-350B3H9EU
Airbus HelicoptersAS-350BAH9EU
Airbus HelicoptersAS-350DH9EU
Airbus HelicoptersAS355EH11EU
Airbus HelicoptersAS355FH11EU
Airbus HelicoptersAS355F1H11EU
Airbus HelicoptersAS355F2H11EU
Airbus HelicoptersAS355NH11EU
Airbus HelicoptersAS355NPH11EU

Every issue · 3

DRS keeps each issue of an STC as its own record, with its own certificate and attachments.

DateStatusFiles
August 24, 2020Amended, currentCertificateApproved model list
February 29, 2016Amended, earlier issueCertificateApproved model list
January 26, 2010Issued, earlier issueCertificateApproved model list