What it approves
Installation of Airfilm Utility Mount
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Number: SR02804LA
Airfilm Camera Systems 6245 Aerodrome Way, Hanger No. 2 P.O. Box 1352 Georgetown, CA 95634
Part 27* of the Code of Federal Regulations.
*Certification basis is set forth in Type Certificate Data Sheet R00008RD
Original Product - Type Certificate Number: R00008RD Make: Bell Textron Canada Limited Model: 505
Installation of Airfilm Utility Mount in accordance with FAA Approved Master Drawing List AFM-505-210, Revision B, dated May 12, 2022, FAA Approved payload limitations, Sections 2.0 and 4.0 of Installation Instructions AFM-505-206, Revision B, dated May 12, 2022, and FAA approved Airfilm Rotorcraft Flight Manual Supplement AFM-505-205, Revision N/C, dated March 6, 2023, or later FAA approved revisions.
The installation should not be incorporated in any aircraft unless it is determined that the interrelationship between this installation and any previously approved configuration will not introduce any adverse effect upon the airworthiness of the aircraft. The approval of this modification applies to the above noted airplane model series only. The equipment for which these provisions are intended has not been certified.
(Continued)
Date of Application: December 23, 2020 Date Reissued:
Date of Issuance: March 22, 2023 Date Amended:
Title: Manager, Airframe Section, Los Angeles ACO Branch
Number: SR02804LA
United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number: SR02804LA
The equipment for which these provisions are intended are subjected to payload limitations defined in FAA Approved sections 2.0 and 4.0 of Installation Instructions AFM-505-206, Revision B, dated May 12, 2022 or later FAA approved revisions. Additional FAA approval is required for the installation of this equipment and must be evaluated to assure satisfactory compliance with the applicable airworthiness standards. A copy of this STC must be included in the permanent records of the modified aircraft. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission. FAA accepted Instructions for Continued Airworthiness AFM-505-208, Revision A, dated June 27, 2022 or later FAA accepted revisions must be made available at the time of installation.
- End -
FAA Form 8110-2 (3/21) Page 3 of 3
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| Bell Helicopter Textron Canada Limited | 505 | R00008RD |