What it approves
Installation of Bell Helicopter Vibration Monitoring System (BHVM) in accordance with Aeronautical Accessories, Inc. (AAI) Installation Instructions document number AA-07161 Revision D, dated May 28, 2009 or later FAA approved revisions.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Number SR02818NY This certificate issued to
Part 29 of the Federal Aviation Regulations.
Installation of Bell Helicopter Vibration Monitoring System (BHVM) in accordance with Aeronautical Accessories, Inc. (AAI) Installation Instructions document number AA-07161 Revision D, dated May 28, 2009 or later FAA approved revisions.
Bell Helicopter Textron, Inc.
441 Industrial Park Road Piney Flats, TN 37686 H4SW Make : Bell Helicopter Textron Model : 212 Date of application : December 17, 2009
Date of issuance : June 30, 2010
Date reissued : June 06, 2011;
August 20, 2010
( Signature) James A. Richmond, Acting Manager Rotorcraft Certification Office, Southwest Region
( Title)
FAA Form 8110-2-1(10-69) Page 2 of 3
FAA Form 8110-2-1(10-69) Page 3 of 3
Number SR02818NY Date of Issuance: June 30, 2010 Date of Reissuance: June 06, 2011
1. This system is installed on a non-required/non-hazardous basis. Under no circumstances is the BHVM system to be used for either increasing Bell Helicopter’s published mandatory inspection intervals (airworthiness limitations) or as an alternate inspection method for those mandatory inspections.
2. Operation is to be in accordance with Aeronautical Accessories, Inc (AAI) Rotorcraft Flight Manual Supplement document number AA-08033 Revision 02, dated December 08, 2009, Transport Canada approved December 11, 2009 or later FAA approved revisions.
3. Maintenance is to be in accordance with Consultants Aerosync Instructions for Continued Airworthiness document number AA-08032 Revision 3, dated May 04, 2010, Transport Canada accepted May 11, 2010 or later FAA accepted revisions.
4. Configuration control is to be in accordance with Consultants Aerosync, Ltd.
Master Drawing List document number AER-MDL-027 Revision D, dated December 18, 2009 or later FAA approved revisions.
5. The installer must determine whether this design change is compatible with previously approved modifications.
6. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| Bell Helicopter Textron | 212 | H4SW |