STC SR03024NY

IMPORT SR03024NY

AEROLITE AG 6373 ENNETBUERGEN, SWITZERLAND Part 29 Federal Aviation Regulations R00002RD Leonardo S.p.A.

AB139, AW139

1. Installation of Aerolite GmbH Emergency Medical System (EMS) Equipment P/N 139250-501 or P/N 139250-502 in accordance with installation documentation as listed in Master Document List MDL-10-009, Rev C, dated August 06, 2025 or later EASA approved revisions.

(Description of Type Design Change Continued on Page 3 of 3)

1. The installer must determine whether this design change is compatible with previously approved modifications.

(Limitations and Conditions Continued on Page 3 of 3) February 24, 2011 September 14, 2016 October 21, 2011 October 23, 2025 John Yoo Manager, International Validation Branch Compliance & Airworthiness Division Aircraft Certification Service 3

IMPORT SR03024NY 3

IMPORT SR03024NY Date Amended: October 23, 2025

Description of Type Design Change (continued):

2. For EMS Equipment P/N 139250-501 configuration:

a. Maintenance in accordance with Aerolite Operations Manual OPM-139250-501, Rev D, dated December 11, 2013 or later EASA accepted revisions.

b. Operation in accordance with Aerolite Flight Manual Supplement FMS-139250-501, Rev A; dated June 28, 2013 or later EASA approved revisions.

3. For EMS Equipment P/N 139250-502 configuration:

a. Maintenance in accordance with Aerolite Operations Manual OPM-139250-502, Rev B, dated August 01, 2025 or later EASA accepted revisions.

b. Operation in accordance with Aerolite Flight Manual Supplement FMS-139250-502, Rev B; dated July 28, 2025 or later EASA approved revisions.

2. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person

3. Maintenance must be in accordance with the airworthiness limitations section of the mandatory maintenance manual supplements identified in the Description of Type Design Change section.

4. Operate in accordance with the limitations section of the airplane flight manual supplements identified in the Description of Type Design Change section.

----------END----------