STC SR03513NY

FAA Form 8110-2 (5/14) Page 1 of

Part of the

Signature

Title SR03513NY Heli-Lynx Helicopter Services 684 Mud Street, Hanger 1 Stoney Creek, Ontario Canada, L8J 3C9 Federal Aviation Regulations.

1. Installation of an oil vent line in accordance with Heli-Lynx Helicopter Services Installation Manual IM-PA-13-026-91-01, Revision Orig., dated April 3, 2014 and Master Drawing List MDL-PA-13-026-91-01 Revision Orig., dated April 3, 2014 or later TCCA approved revisions.

2. Operation of the aircraft with the oil vent installed must be in accordance with Heli-Lynx Helicopter Services Flight Manual Supplement FMS-PA-13-026, Revision Orig., dated April 3, 2014, TCCA approved December 9, 2014, or later TCCA approved revisions.

(See Description of Type Design Change continued on Page 3 of 3)

1. Pre-requisite Requirements:

Helicopter must be quipped with a Honeywell LTS101 engine in accordance with:

For AS350D TCDS H9EU For AS350BA FAA STC SR02295NY (TCCA STC SH06-5) For AS350B2 FAA STC SR02295NY (TCCA STC SH06-5) or FAA STC # SR01647SE

(See Limitations and Conditions continued on Page 3 of 3) Gaetano Sciortino Manager New York Aircraft Certification Office Airbus Helicopters AS350D, AS350BA, AS350B2 June 25, 2014 March 13, 2015 IMPORT H9EU 3

FAA Form 8110-2 (5/14) Page 2 of

To (Name and address of transferee)

From (Name and address of grantor)

3 SR03513NY

FAA Form 8110-2 (5/14) Page 3 of

3 Date of Issuance: March 13, 2015

Description of Type Design Change (continued):

3. Maintenance must be in accordance with Heli-Lynx Helicopter Services Maintenance Manual Supplement ICA-PA-13-026-05-01 Revision Orig., dated April 3, 2014, or later TCCA accepted revisions.

2. The installer must determine whether this design change is compatible with previously approved modifications.

3. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

----------END---------- SR03513NY