STC SR03685NY

FAA Form 8110-2 (5/14) Page 1 of

Part of the

Signature

Title SR03685NY Airbus Helicopters Canada Limited 1100 Gilmore Road, P.O. Box 250 Fort Erie, Ontario L2A 5M9 Canada Federal Aviation Regulations.

1. Install 50 amp electrical power supply for Longline/Carousel system in accordance with Airbus Helicopters Canada Limited (AHCA) Master Drawing List MDL-115-004, Issue A, dated October 8, 2015, Transport Canada approved October 22, 2015, or later Transport Canada-approved revision.

2. Rotorcraft is to be maintained in accordance with AHCA Instructions for Continued Airworthiness ICA-AHCA-292, Revision 0, dated October 14, 2015, Transport Canada accepted October 16, 2015, or later Transport Canada-accepted revision.

3. Operation is in accordance with AHCA Flight Manual Supplement FMS-AHCA-168, Revision 0, dated September 9, 2015, Transport Canada approved October 22, 2015, or later Transport Canada-approved revision.

1. As a prerequisite, the rotorcraft must be equipped with an approved cargo hook installation and operated in accordance with the approved Flight Manual Supplement for the cargo hook -- including any applicable operating limitation relating to human external cargo -- in conjunction with the AHCA Flight Manual Supplement specified herein. The cargo hook installation must comply with 14 CFR 27.865.

2. This approval does not include the Longline/Carousel system for which the electrical power supply is installed.

(See Limitations and Conditions continued on Page 3 of 3) Gaetano Sciortino Manager New York Aircraft Certification Office Airbus Helicopters EC130T2 February 8, 2016 March 30, 2016 IMPORT H9EU 3

FAA Form 8110-2 (5/14) Page 2 of

To (Name and address of transferee)

From (Name and address of grantor)

3 SR03685NY

FAA Form 8110-2 (5/14) Page 3 of

Date of Issuance: March 30, 2016

3. The electrical connection between the belly-mounted power supply and any optional external equipment is to be provided by the installer and must include a breakaway-type electrical connection.

4. The installer must determine whether this design change is compatible with previously approved modifications.

5. If the holder agrees to permit another person to use the certificate to alter the product, the holder must give the other person written evidence of that permission.

-----END-----

SR03685NY