What it approves
Installation of the Helicopter Film Works Inc Mount Assemblies
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
FAA Form 8110-2 (5/14) Page 1 of
Part of the
Signature
Title SR04170NY Helicopter FilmWorks Inc.
30 Bronte Crt.
Dundas, Ontario L9H 7N2 Canada Civil Air Regulations.
1. Installation of the Helicopter FilmWorks Inc. Mount Assemblies must be in accordance with Eligibility List CE-HFW-002 Rev 2, dated September 29, 2017, or later Transport Canada approved revisions, and Installation Instructions CI-HFW-002-1 Rev 3, dated May 14, 2018, or later Transport Canada approved revisions.
2. Maintenance of the Helicopter FilmWorks Inc. Mount Assemblies must be in accordance with the Instructions for Continued Airworthiness CC-HFW-002-01, Rev 3, dated February 1, 2018, or later Transport Canada accepted revisions.
3. Operation of the Helicopter FilmWorks Inc. Mount Assemblies must be in accordance with Flight Manual Supplement CF- HFW-002-01, Rev 4, dated May 14, 2018, or later Transport Canada approved revisions.
1. The installer must determine whether this design change is compatible with previously approved modifications.
2. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.
3. This STC approves Helicopter FilmWorks Mount Assemblies for Camera system(s), structural provisions only. The FAA has not certified the equipment for which these provisions are intended. You must get additional FAA approval to install this equipment. The FAA must evaluate the installation to ensure it complies with the applicable airworthiness standards.
(See Limitations and Conditions Continued on Page 3 of 3) Raymond H. Reinhardt Acting Manager New York ACO Branch MD Helicopters Inc.
369D, 369E, 369F, 369FF October 3, 2017 September 12, 2018 IMPORT H3WE 3
FAA Form 8110-2 (5/14) Page 2 of
To (Name and address of transferee)
From (Name and address of grantor)
3 SR04170NY
FAA Form 8110-2 (5/14) Page 3 of
3 Date of Issuance: September 12, 2018
4. Day and Night VFR only.
5. No flight into known icing condition.
6. For night operations MD Helicopter approved belly landing lights or Helicopter FilmWorks Inc. mount landing lights must be installed.
7. Maximum camera ball size is 24" diameter.
8. Maximum weight of installed camera(s) total 175 pounds.
9. Maximum rear ballast mount weight total 150 pounds.
10. Maximum airspeed 130 KIAS with a camera ball size up to 24" diameter.
11. If gooseneck fitting (p/n CM01107-203) is installed, pitot tube extension kit (p/n CM01421-001) must be installed.
----------END----------
SR04170NY
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.