What it approves
Installation of the Kodiak Tracking System
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
FAA Form 8110-2 (5/14) Page 1 of
Part of the
Signature
Title SR04422NY Clean Harbors Exploration Services Ltd.
#300, 444 58th Ave SE Calgary, Alberta Canada T2H 0P4 Federal Aviation Regulations.
1. Installation of the Kodiak Tracking System must be in accordance with Transport Canada Civil Aviation (TCCA) approved AERO Design Ltd. Document Control List DCL844, Revision 2, dated October 2, 2013, or later TCCA approved revision.
2. Maintenance of the Kodiak Tracking System must be in accordance with TCCA accepted Clean Harbors Exploration Services LP Maintenance Manual Supplement MMS844.92, Revision 0, dated January 12, 2012, or later TCCA accepted revision.
3. Operation of the Kodiak Tracking System must be in accordance with TCCA approved Clean Harbors Exploration Services LP Rotorcraft Flight Manual Supplement FMS844.91, Revision 1, dated January 22, 2013, or later TCCA approved revision.
1. The installer must determine whether this design change is compatible with previously approved modifications.
2. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.
(See Basis of Certification on Page 3 of 3) Anthony E. Gallo Manager New York ACO Branch Bell 206B, 206L, 206L-1, 206L-3, 206L-4, 407 August 7, 2019 December 19, 2019 IMPORT H2SW 3
FAA Form 8110-2 (5/14) Page 2 of
To (Name and address of transferee)
From (Name and address of grantor)
3 SR04422NY
FAA Form 8110-2 (5/14) Page 3 of
3 Date: December 19, 2019
Certification Basis:
Based on 14 CFR §§ 21.115 and 21.101, and the FAA policy for significant changes in FAA Order 8110.48, the certification basis for the modification to the Bell 206B, 206L, 206L-1, 206L-3, 206L-4 and 407 is as follows:
a. The type certification basis for the Bell 206B, 206L, 206L-1, 206L-3, 206L-4 and 407 aircraft as shown on the TCDS H2SW for parts not changed or not affected by the change.
b. The type certification basis for the Bell 206B, 206L, 206L-1, 206L-3, 206L-4 and 407 aircraft for parts changed or affected by the change as shown on the TCDS H2SW with the following exceptions:
• 14 CFR Part 27 including Amendment 27-1 through 27-30
• 14 CFR 27.561(b)(3) at Amendment 27-0
• 14 CFR 27.785(a) and (b) at Amendment 27-21
----------END---------- SR04422NY
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 6
| Make | Model | Data sheet |
|---|---|---|
| Bell Helicopter Textron Canada Limited | 206B | H2SW |
| Bell Helicopter Textron Canada Limited | 206L | H2SW |
| Bell Helicopter Textron Canada Limited | 206L-1 | H2SW |
| Bell Helicopter Textron Canada Limited | 206L-3 | H2SW |
| Bell Helicopter Textron Canada Limited | 206L-4 | H2SW |
| Bell Helicopter Textron Canada Limited | 407 | H2SW |