What it approves
Installation of Cabin Furnishings
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
FAA Form 8110-2 (11/20) SUPERSEDES PREVIOUS EDITION Page 1 of ___ United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number:
IMPORT SR04577NY Ascent Aerospace Ltd.
1550 Springhill Road Parksville, British Columbia Canada V9P 2T2 29 Title 14 Code of Federal Regulations H1SW Bell 205A-1
1. Installation of Cabin Furnishings has three components that are mutually independent of each other.
a). Installation of the Cabin Handle must be in accordance with Transport Canada Civil Aviation (TCCA) approved, Ascent Aerospace Ltd. Document Control List 212-2002-DCL1, Revision NC, dated April 8, 2020.
(Description of Type Design Change Continued on Page 3 of 3)
1. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.
(Limitations and Conditions Continued on Page 3 of 3) December 9, 2020 January 19, 2021 Timothy J. Hadsall Acting Manager, New York ACO Branch Compliance & Airworthiness Division Aircraft Certification Service 3
FAA Form 8110-2 (11/20) SUPERSEDES PREVIOUS EDITION Page 2 of ___ United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number:
IMPORT SR04577NY SR04577NY 3
FAA Form 8110-2 (11/20) SUPERSEDES PREVIOUS EDITION Page ___ of ___ United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number:
IMPORT SR04577NY Date of Issuance: January 19, 2021
Description of Type Design Change (continued):
b). Installation of the Hand Loop must be in accordance with TCCA approved, Ascent Aerospace Ltd. Document Control List 212-2002-DCL2, Revision NC, dated April 8, 2020.
c). Installation of the Hoist Operator's Tether to be completed in accordance with TCCA approved, Ascent Aerospace Ltd. Document Control List 212-2002-DCL3, Revision A, dated January 22, 2021.
2. The installer must determine whether this design change is compatible with previously approved modifications.
3. You cannot use descriptive data from this design change to duplicate other products. This approval is limited to only the installation made in Bell, 205A-1, Serial Number 30023. This STC does not permit manufacturing of parts for multiple installations.
4. Installation of the Hoist Operator's Tether requires installation of the Hoist Kit (STC# SH3190SO) as a prerequisite.
Certification Basis:
14 CFR Part 29 at amendment 29-3.
----------END---------- 3 3
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| Bell Textron Inc. | 205A-1 | H1SW |