STC SR04584NY

FAA Form 8110-2 (11/20) SUPERSEDES PREVIOUS EDITION Page 1 of ___ United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number:

IMPORT SR04584NY Avio Design Group Inc.

305 Woodside Place Okotoks, Alberta Canada T1S 1L9 27 Title 14 Code of Federal Regulations H2SW Bell 206, 206A, 206A-1, 206B, 206B-1, 206L, 206L-1, 206L-3, 206L-4

1. Installation of the COVID Barrier must be in accordance with Transport Canada Civil Aviation (TCCA) approved Avio Design Group Inc. (Avio dg) Modification Instruction 2039-MI-001 Revision "--", dated May 25, 2020, or later TCCA approved revision.

2. Maintenance must be in accordance with TCCA accepted Avio dg Instructions for Continued Airworthiness 2039-CA-001 Revision "--", dated May 25, 2020, or later TCCA accepted revision.

(Description of Type Design Change Continued on Page 3 of 3)

1. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

(Limitations and Conditions Continued on Page 3 of 3) November 16, 2020 February 8, 2021 Timothy J. Hadsall Acting Manager, New York ACO Branch Compliance & Airworthiness Division Aircraft Certification Service 3

FAA Form 8110-2 (11/20) SUPERSEDES PREVIOUS EDITION Page 2 of ___ United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number:

IMPORT SR04584NY SR04584NY 3

FAA Form 8110-2 (11/20) SUPERSEDES PREVIOUS EDITION Page ___ of ___ United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number:

IMPORT SR04584NY Date of Issuance: February 8, 2021

Description of Type Design Change (continued):

3. Definition of the Type Design Change can be found in TCCA approved Avio dg Master Data List 2039-MD-001 Revision " --", dated May 25, 2020, or later TCCA approved revision.

2. The installer must determine whether this design change is compatible with previously approved modifications.

3. This STC is applicable to all serial numbers for this Make-Model.

Certification Basis:

14 CFR Part 27 including amendments 27-1 through 27-28.

----------END---------- 3 3