STC SR04593NY

FAA Form 8110-2 (11/20) SUPERSEDES PREVIOUS EDITION Page 1 of ___ United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number:

IMPORT SR04593NY Ascent Aerospace Ltd.

1550 Springhill Road Parksville, British Columbia Canada V9P 2T2 29 Title 14 Code of Federal Regulations H1SW Bell 205A-1

1. Installation of Two Place Seat must be in accordance with Transport Canada Civil Aviation (TCCA) approved Ascent Aerospace Ltd. Document Control List, 212-2001-DCL, Rev. NC, dated April 8, 2020, or later TCCA approved revision.

1. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

(Limitations and Conditions Continued on Page 3 of 3) December 9, 2020 March 29, 2021 Timothy J. Hadsall Acting Manager, New York ACO Branch Compliance & Airworthiness Division Aircraft Certification Service 3

FAA Form 8110-2 (11/20) SUPERSEDES PREVIOUS EDITION Page 2 of ___ United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number:

IMPORT SR04593NY SR04593NY 3

FAA Form 8110-2 (11/20) SUPERSEDES PREVIOUS EDITION Page ___ of ___ United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number:

IMPORT SR04593NY Date of Issuance: March 29, 2021

2. The installer must determine whether this design change is compatible with previously approved modifications.

3. You cannot use descriptive data from this design change to duplicate other products. This approval is limited to only the installation made in Bell, 205A-1, Serial Number 30023. This STC does not permit manufacturing of parts for multiple installations.

Certification Basis:

Based on 14 CFR § 21.115 and § 21.101, and the FAA policy for significant changes in FAA Order 8110.48, the certification basis for this modification to Bell Model 205A-1 is as follows:

a. The type certification basis for the Bell Model 205A-1 as shown on TCDS H1SW for parts not changed or not affected by the change.

b. The type certification basis for the Bell Model 205A-1 as shown on TCDS H1SW for parts changed or affected by the change with the following additional requirements:

• Compliance with 14 CFR Part 29 at amendment 29-2.

----------END---------- 3 3