STC SR09348RC

Part 6 of the Civil Air R egulations.

Original Product --Type Certificate N umber :

Installation of the improved metal blade main rotor grips with integral drag brace clevis, new drag brace, and matching adapter nut for wood blade configurations in accordance with Texas Helicopters Co., Inc., Federal Aviation Administration (FAA) Drawing List THC-2002-71, revision IR, Dated July 11, 2002, or later FAA approved revision.

1. Instructions for Continued Airworthiness, Texas Helicopter Co., Inc., Document THC-2002-22, revision 0, dated January 25, 2002, or later FAA accepted revision, and FAA approved Airworthiness Limitation Section, Dated October 29, 2002.

2. The installer must determine whether this design change is compatible with previously approved modifications.

3. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

This certificate and the supporting data, which is the basis for approval, shall remain in effect until surrendered, suspended, r evoked or a termination date is otherwise established by the A dministrator of the F ederal A viation A dministration.

Scott’s-Bell 47, Inc.

100 Minnesota Avenue Le Sueur, MN 56058

H5SW/H7SW M ake : Continental Copter; Gifton McCreary M odel : OH-13H (Tomcat Mark 5A); OH-13E/M74 Date of application : July 16, 2002

Date of issuance : October 29, 2002 Date reissued : December 15, 2010; August 7, 2014

B y direction of the A dministrator

Original Signed By:

Karol Mordasiewicz (Signature) Karol Mordasiewicz Manager, Airframe and Administrative Branch Chicago Aircraft Certification Office

(Title)